Yamaha CC-70W Owner's Manual page 36

RECORDING COMPACT DISCS
Receiver
CD Player
6
Tape Deck (KXW-S70)
5
Tape Deck (KX-S90)
EMPTY
TUNER DIRECT
1 2
1 2
6 7
6 7
A B
TIME PROG
SEARCH
SKIP
2
DISC SKIP RANDOM REPEAT
PRESET
DOWN UP
PLAY STOP
REC/PAUSE
POWER SLEEP
1
1
4 3
4 5 3
6
3 4 5
3 4 5
8
8 9 0
C D E
+
TAPE EDIT I0
STOP PLAY/PAUSE
1
CD
A/B/C/D/E
TUNER
PLAY
TAPE
DECK PHONO/AUX
A/B
DISPLAY VOLUME
+
-
Recording CD(s) on both sides of
a tape automatically
1
Press the CD input selector button and load the disc to be
recorded.
2
Select the disc by pressing the DISC SKIP button.
3
Load a tape into the cassette compartment.
4
When recording with the Dolby NR system, set the Dolby
NR switch to B or C; if not, set it to OFF.
* For selection of the Dolby B or C position, refer to the
"Dolby B and C Type Noise Reduction" on page 28 or
30.
5
Set the reverse mode switch to
6
Press the EDIT button. ("EDIT" appears on the display.)
CD playback and recording starts. Recording is carried
out on side A and B of the tape continuously.
* If the tape has not rewound to the end, it is rewound to
the end rapidly before recording starts.
Recording starts from the first part of the tape on which
recording can be done.
* "A " (or "
the tape on which recording is being carried out.
* When the recording on side A finishes while a track is
being played back, the sound is automatically faded
out, and then the recording stops.
The recording on side B starts from the beginning of
the same track.
Notes
•
If the tape's total possible recording time is longer than the
total playing time of the selected disc, tracks on another
disc are recorded automatically.
In this case, as many as three discs can be recorded
continuously.
•
During recording, the PLAYXCHANGE button on the CD
player is disabled.
•
The CD player's repeat play mode (except for the "A REP"
mode) will be canceled during this recording mode. If the
"A REP" repeat play mode is selected, it will not be
canceled, but it will not function until the recording is
finished.
Recording programmed tracks
Programmed tracks from one or more discs can also be
recorded in the same way.
1 1
Program desired tracks from one or more discs. (Refer to
page 18 for the programming procedure.)
2 2
Follow steps 3–6 described above.
To cancel this function
Before recording, press the stop
or the tape deck.
To stop recording
Press the stop button of the tape deck.
(At this time, CD playback automatically stops.)
34
or .
B") on the display shows the side of
button of the CD player