Yamaha CC-70W Owner's Manual page 8

Natural sound mini component system
Hide thumbs Also See for CC-70W:
Table of Contents

Advertisement

NAMES OF CONTROLS, INDICATORS AND REAR PANEL PARTS
Rear Panel of Receiver
1. Antenna Terminals
2. INPUT (PHONO and AUX) Terminals
3. SPEAKERS SELECTOR Switch
(U.K. and Europe models only)
4. GND Terminal
5. SPEAKERS Terminals
6. VOLTAGE SELECTOR (General model only)
7. FREQUENCY STEP Switch (General model only)
8. System Control Sockets
9. AC Supply Lead
SPEAKERS SELECTOR switch (U.K. and Europe
models only)
If you connect YAMAHA NX-S70 speaker system to this
unit, set this switch to "NX-S70".
If you connect a speaker system other than NX-S70 to this
unit, set this switch to "CONVENTIONAL".
FREQUENCY STEP switch (General model only)
Because the interstation frequency spacing differs in
different areas, set the FREQUENCY STEP switch
(located at the rear) according to the frequency spacing in
your area. Before setting this switch, disconnect the AC
supply lead of this unit from the AC outlet.
VOLTAGE SELECTOR (General model only)
The voltage selector on the rear panel of this unit must
be set for your local main voltage BEFORE plugging
into the AC main supply.
Voltages are 110/120/220/240V AC, 50/60 Hz.
Rear Panel of Cassette Tape Deck
10. System Control Connector
Rear Panel of CD Player
11. System Control Connector
6

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cc-70sRx-s70Cdc-s90Kxw-s70Nx-s70Kx-s90

Table of Contents