Setting Tr-069; Setting Antenna - Huawei B593 Online Help Manual

Online Help
3. Set Send SMS notification to, and Forward SMS from.
After Send SMS notification to setting takes effect, message test, forwarding, and
notification settings can be configured.
4. Configure the notification settings for each Events.
5. Click Submit.
----End

9.7 Setting TR-069

TR-069 is a standard for communication between CPEs and the auto-configuration server
(ACS). If your service provider uses the TR-069 automatic service provision function, the
ACS automatically provides the CPE parameters. If you set the ACS parameters on both the
CPE and ACS, the network parameters on the CPE are automatically set using the TR-069
function, and you do not need to set other parameters on the CPE.
To configure the CPE to implement the TR-069 function, perform the following steps:
1. Choose System > TR-069 Settings.
2. To enable the CPE to send inform packets to the ACS at predefined intervals, set Periodic
inform to Enable.
3. If you set Periodic inform to Enable, set Periodic inform interval.
4. In the ACS URL box, enter the ACS URL address.
5. Enter ACS user name and ACS password for CPE authentication.
6. Click Submit.
----End

9.8 Setting Antenna

To set the antenna type, perform the following steps:
1. Choose System > Antenna Settings.
2. Select the antenna type from the drop-down list.
3. Click Submit.
----End
To use the CPE to access the ACS, you must provide a user name and password for
authentication. The user name and the password must be the same as those defined
on the ACS.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
9 System
43