Uploading A Configuration File; Changing The Password; Setting The Date And Time - Huawei B593 Online Help Manual

Online Help

9.1.4 Uploading a Configuration File

You can upload a backed up configuration file to restore the CPE. To do so:
1. Choose System > Maintenance.
2. Click Browse on the Maintenance page.
In the displayed dialog box, select the backed up configuration file.
3. Click Open.
The dialog box closes. In the box to the right of Configuration file, the save path and name
of the backed up configuration file are displayed.
4. Click Upload.
5. Click OK.
The CPE uploads the backed up configuration file. The CPE then automatically restarts.
----End

9.2 Changing the Password

This function enables you to change the login password of the admin user. After the password
changes, enter the new password the next time you log in.
To change the password, perform the following steps:
1. Choose System > Change Password.
2. Enter the current password, set a new password, and confirm the new password.
New password and Confirm password must contain 8 to 15 ASCII characters.
3. Click Submit.
----End

9.3 Setting the Date and Time

To synchronize the time with the network, perform the following steps:
1. Choose System > Date & Time.
2. From the Primary NTP server drop-down list, select a server as the primary server for time
synchronization.
3. From the Secondary NTP server drop-down list, select a server as the IP address of the
secondary server for time synchronization.
4. Set Time zone.
5. Select Daylight saving time.The CPE automatically provides the default DST time based on
the time zone.
6. Click Submit.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
9 System
40