Selecting An Apn Profile; Selecting Pdp Type; Setting Data Roaming; Apn Management - Huawei B593 Online Help Manual

Online Help

3.1.3 Selecting an APN Profile

You can select an APN profile for the CPE to access the Internet.
To set the APN profile, perform the following steps:
1. Choose Internet > Network Connection.
2. Select a profile from the Profile drop-down list.
3. Click Submit.
----End

3.1.4 Selecting PDP Type

You can select a PDP (Packet Data Protocol) to set the dial-up type, perform the following
steps:
1. Choose Internet > Network Connection.
2. Set PDP type to one of the following values described in the following table:
Value
IPv4
IPv4v6
3. Click Submit.
----End

3.1.5 Setting Data Roaming

To turn roaming on or off, perform the following steps:
1. Choose Internet > Network Connection.
2. Do as follows:


3. Click Submit.
----End

3.2 APN Management

To create an APN profile, perform the following steps:
Description
Internet Protocol version 4 (IPv4) that is the foundation for current Internet
technologies. Because IP resources are limited, an IP address is shared by
different persons in different time periods, that is, an IP address is not
allocated to only one network subscriber. Thus, the real-name system
cannot be implemented over the IPv4-based networks.
IPv4-to-IPv6 transition technology that is used when IPv4 and IPv6 coexist.
Select the Enable check box behind the Data Roaming to turn it on.
Clear the Enable check box behind the Data Roaming to turn it off.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
3 Internet
8