Setting Up A Wi-Fi Connection - Huawei B315 LTE CPE Quick Start Manual

3

Setting up a Wi-Fi connection

1. From your Wi-Fi enabled client, scan for wireless networks in your area.
2. Connect to the network name that matches the SSID found on the device label.
3. When prompted for password, enter the Wi-Fi Key found on the device label. (The
Wi-Fi key is case sensitive.) Your client will notify you when it is connected.
 For details about how to manually enable or disable the Wi-Fi function of the
B315, refer to the WLAN settings section of the help information on the web
management page.
 To prevent unauthorized parties from accessing your Wi-Fi network, it is
recommended that you change the SSID and Wi-Fi key from time to time. For
details, see the help information on the web management page.
4
Configuring your B315
1. After a client is connected to the B315 through Wi-Fi or LAN port, launch a
browser on the client and visit web management page (http://192.168.8.1).
2. Enter the user name (admin by default) and password (admin by default) to log in
to the web management page.
3. Follow the quick setup wizard to check or set network connection parameters step
by step. For details, see the help information on the web management page.
To protect your account, change the password after your first login. For details, see

the help information on the web management page.
If you modify the SSID and Wi-Fi key, you must set up the Wi-Fi connection on the

client again.
3