Download Print this page
Huawei B593s-22 Manual
Hide thumbs Also See for B593s-22:

Advertisement

Quick Links

Procedure
1. You should start by inserting the SIM card and then plug the power adapter to the B593 4G
router. The SIM card must be inserted on the right side when looking at the front of the
router. You can see the SIM card slot in the LTE CPE B593. The power plug must be inserted
behind the router.
2. Now you need to connect the router to your computer via the wireless network (WiFi). You
will find the router's name and network code on the sticker behind the router.
WLAN – Name (SSID) is the router's name and WLAN – Key (WPA/WPA2) is the router's
wireless network password. When you first connect the router via WiFi, it would be necessary to
enter the WLAN key and get connected.
If you experience problems connecting to the router with the information on the back of the
router, this information may be changed. Press reset on the side of the router with a ball pen for
about 20 seconds and try again.
3. Once connected, open your Internet browser (e.g. Internet Explorer, Chrome or Safari) and in
the address bar type the routers address http://192.168.1.1 (or Homerouter.cpe). It's the device
website on the label.
The default language is English, but you can choose your preferred language. The username
is admin and the password is admin (lowercase). You can also find both the router's address
and password on the sticker behind the router.
4. The router will ask you to change the password when you login. You can ignore it. Your
router is already secured with the unique network code that you entered earlier in order to
connect to the router.
5. Now select Setup Wizard on the left menu.
You must validate your PIN to the SIM card. You will find PIN 1 on the frame (where you took
the SIM card out of the scrape area). Then click Validate. Tick Enable next to Save my
PIN and press Next.
Please note that the router stores the PIN code for the SIM card. Put one new SIM card in the
router at a time; enter the PIN code for the new SIM card in the same way.
But if you use the unlocked B593 Router, it's unnecessary to do this. 4GLTEMALL.com is
selling the unlocked B593 Router.
6. You do not need to change anything in the next section called Internet.

Advertisement

loading

Summary of Contents for Huawei B593s-22

  • Page 1 Procedure 1. You should start by inserting the SIM card and then plug the power adapter to the B593 4G router. The SIM card must be inserted on the right side when looking at the front of the router. You can see the SIM card slot in the LTE CPE B593. The power plug must be inserted behind the router.
  • Page 2 4. Select System > Upgrade > select tar. > press Upgrade, then wait for few minutes, the system will auto upgrade the firmware of the HUAWEI B593u-12. These steps are also usable for HUAWEI B593s-22 and HUAWEI B593 other models. The firmware may vary varies.

This manual is also suitable for:

B593u-12B593