Page 1
MDF5250HD-DN Commissioning English Rev. 1.0.0 | 2020-09-10...
Page 2
Third-party trademarks are named for information purposes only. Dallmeier respects the intellectual property of third parties and always attempts to ensure the complete identification of third-party trademarks and indication of the respective holder of rights. In case that protected rights are not indicated separately, this circumstance is no reason to assume that the respective trademark is unprotected.
Keep all printed documents relating to your device in a legible condition and in a suitable location for future reference. Save digital documents relating to your device (e.g. the technical product specification) on a suitable data storage device. Regularly check the website www.dallmeier.com for any product documentation updates. This Document Commissioning The document entitled “Commissioning”...
• Modifications to the Device Do not make any modifications to the hardware or software of the device that have not been tested and approved by Dallmeier. Inappropriate modifications (e.g. unapproved paintwork or housing add-ons) may cause malfunctions, damage and data loss and may result in the loss of warranty.
Page 9
Keep all printed documents relating to your device in a legible condition and in a suitable location for future reference. Save digital documents relating to your device (e.g. the technical product specification) on a suitable data storage device. Regularly check the website www.dallmeier.com for any product documentation updates. • Condensation If the device is brought from a cold to a warm environment, resulting condensation may cause malfunctions and damage.
Transportation and Packaging Store the original packaging for later transportation. Dallmeier is not responsible for any damage resulting from unprofessional or improper transportation. The device should only be shipped in the original packaging. If the original packaging is no longer available, ensure that the used packaging sufficiently protects the device against damage, moisture, heat and cold.
Appropriate Use The MDF5250HD-DN is a high-resolution single-sensor network camera with separate housings for the lens-sensor unit and the connected encoder unit. The module camera is designed for indoor installations and can be operated with Power-over-Ethernet (PoE, Class 0, IEEE 802.3af) or powered by an external 24 V DC power supply unit.
Page 29
The use of an incompatible memory card may damage the device or memory card or corrupt the data stored on it, resulting in malfunctions and loss of data. ➡ Only use a memory card that has been tested and approved by Dallmeier (failure to do so may result in the loss of warranty). Damage to the device or memory card due to incorrect card insertion ➡...
Page 33
192.168.2.28 You can change the IP address, subnet mask and gateway addressing of the device using the Dallmeier software PService3. ➡ Ensure that your PC/web browser can establish an Ethernet connection to your device (if necessary, contact your network administrator for more information and assistance).
Page 34
The default password is the complete serial number of the device. The serial number is printed on the type plate of the device and can also be determined using the Dallmeier software PService3. ➡ Enter the default password (serial number of the device).
Page 38
The technical product specification (basic data) in this document is based on the information at the time of this document’s compilation. Detailed information and possible updates can be found in the currently valid product specification for your device at www.dallmeier.com.