Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for dallmeier DDF5 50HDV-DN-SM Series
Summary of Contents for dallmeier DDF5 50HDV-DN-SM Series
- Page 1 DDF5(X)50HDV-DN Commissioning English 007531 | Rev. 2.0.0 | 2019-05-22...
- Page 2 Torx of Acument Intellectual Properties, LLC headquartered in Rockford, Illinois, USA. Third-party trademarks are named for information purposes only. Dallmeier respects the intellectual property of third parties and always attempts to ensure the complete identification of third-party trademarks and indication of the respective holder of rights.
-
Page 3: Table Of Contents
Warranty Appropriate Use Operation Approvals/Certifications 6 Requirements Ambient Conditions Power Supply 7 Maintenance, Inspection and Cleaning 8 Installation and Commissioning 9 Interfaces 10 Pin Assignment 11 Inserting a Memory Card 12 Connection, First-Time Access and Login Connection First-Time Access Login 13 Technical Product Specification (Basic Data) 14 Dimensions Rev. 2.0.0 | © 2019 Dallmeier | www.dallmeier.com... -
Page 4: Validity
Keep all documents in legible condition and in a suitable location for future refer- ence. Regularly check the website www.dallmeier.com for the latest product documen- tation updates. Rev. 2.0.0 | © 2019 Dallmeier | www.dallmeier.com... -
Page 5: This Document
Configuration The document entitled “Configuration” contains detailed information concerning the configuration of the device. The target audience of the document is trained system integrators (installation contractors of video security/surveillance systems). Rev. 2.0.0 | © 2019 Dallmeier | www.dallmeier.com... -
Page 6: Typographical Conventions
NOTICE NOTICE addresses practices not related to physical injury and indicates measures to prevent device and/or property damage due to improper installation, assembly, wiring, operation, configuration or maintenance of the device. Rev. 2.0.0 | © 2019 Dallmeier | www.dallmeier.com... - Page 7 (housing parts, mounting elements, connections/interfaces, etc.) or to control elements of the device’s web-based graphical user interface (menu items, buttons, etc.). Paragraphs in italics provide information on basic principles, special features and efficient procedure as well as general recommendations. Rev. 2.0.0 | © 2019 Dallmeier | www.dallmeier.com...
-
Page 8: Safety Instructions
• System Components Only use internal components that have been tested and approved by Dallmeier. Inappropriate internal components may cause malfunctions, damage and data loss and may result in the loss of warranty. - Page 9 Keep all documents in legible condition and in a suitable location for future reference. Regularly check the website www.dallmeier.com for the latest product docu- mentation updates. • Condensation If the device is brought from a cold to a warm environment, resulting condensa- tion may cause malfunctions and damage.
- Page 10 If objects or liquids get into the device, immediately disconnect it from the power supply (pull out the power plug or disconnect the device from the PoE enabled PSE port). Contact the sales partner responsible for your area. Rev. 2.0.0 | © 2019 Dallmeier | www.dallmeier.com...
- Page 11 Do not dispose waste electrical and electronic equipment into the household trash. Disconnect the device from the power supply. Remove all connected peripherals. Return the device to the sales partner responsible for your area. Rev. 2.0.0 | © 2019 Dallmeier | www.dallmeier.com...
-
Page 12: General Notes
• Three spare O-rings for mounting screws • Drilling template • Product documentation The scope of delivery may differ depending on the ordered equipment, device variant or country of destination. Rev. 2.0.0 | © 2019 Dallmeier | www.dallmeier.com... -
Page 13: Transportation And Packaging
DDF5(X)50HDV-DN-SM Transportation and Packaging Store the original packaging for later transportation. Dallmeier is not responsible for any damage resulting from unprofessional or improper transportation. The device should only be shipped in the original packaging. If the original packaging is no longer available, ensure that the used packaging suf- ficiently protects the device against damage, moisture, heat and cold. -
Page 14: Appropriate Use
➡ Use the optionally available Dallmeier outdoor wall mount bracket if you want to install the device in outdoor environ- ments (for more information, contact the sales partner respon- sible for your area or visit www.dallmeier.com). -
Page 15: Operation
• The accuracy of the Automatic White Balance (AWB) algorithm depends on the used lighting. Mixed light (consisting of artificial light and daylight) may cause color distortions (inaccurate color reproduction). • Poor lighting can lead to an incorrect white balance. Rev. 2.0.0 | © 2019 Dallmeier | www.dallmeier.com... -
Page 16: Approvals/Certifications
Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. Rev. 2.0.0 | © 2019 Dallmeier | www.dallmeier.com... -
Page 17: Requirements
Ambient Conditions The device is primarily designed for indoor use and may only be used outdoors in conjunction with the optionally available Dallmeier outdoor wall mount bracket (for more information, contact the sales partner responsible for your area or visit www.dallmeier.com). -
Page 18: Power Supply
➡ Carry out all protective measures for a standard-compliant earthing/grounding of the device in accordance with the cur- rently applicable DIN, VDE and ISO standards in order to ensure the safety of persons (protection against dangerous contact voltages). Rev. 2.0.0 | © 2019 Dallmeier | www.dallmeier.com... - Page 19 DIN, VDE and ISO standards in order to ensure the safety of the device (pro- tection against over-voltages) and its immunity to electromag- netic interferences (EMI). Rev. 2.0.0 | © 2019 Dallmeier | www.dallmeier.com...
- Page 20 PoE midspan device) or disconnect the used single-port PoE injector from the power supply before un-mating the jack-plug connection in order to prevent damage to the contacts of the RJ45 connectors by contact erosion. Rev. 2.0.0 | © 2019 Dallmeier | www.dallmeier.com...
-
Page 21: Maintenance, Inspection And Cleaning
• Do not use microfiber cleaning cloths. • Avoid excessive rubbing. • To dry the plastic bubble, dab it carefully and gently with a clean, soft, dry and antistatic cloth to avoid scratching the surface. Rev. 2.0.0 | © 2019 Dallmeier | www.dallmeier.com... -
Page 22: Installation And Commissioning
• Plastic screw anchors for use in solid masonry materials (concrete/brick) • Gravity or spring toggle anchors for use in drywall systems (plasterboard) Rev. 2.0.0 | © 2019 Dallmeier | www.dallmeier.com... - Page 23 Commissioning DDF5(X)50HDV-DN-SM ❶ ⓐ Torx screwdriver with hollow point (T20 H) ⓐ Rev. 2.0.0 | © 2019 Dallmeier | www.dallmeier.com...
- Page 24 DDF5(X)50HDV-DN-SM Commissioning ⓐ 3× Tamper-resistant torx screw (Torx-TR 20) ⓐ ➡ Loosen the three tamper-resistant torx screws (Torx-TR 20) of the housing cover using a torx screwdriver with hollow point (T20 H). Rev. 2.0.0 | © 2019 Dallmeier | www.dallmeier.com...
- Page 25 Commissioning DDF5(X)50HDV-DN-SM ❷ ➡ Remove the housing cover (including the bubble) from the housing base. Rev. 2.0.0 | © 2019 Dallmeier | www.dallmeier.com...
- Page 26 DDF5(X)50HDV-DN-SM Commissioning ❸ ⓐ Threaded blanking plug ⓑ Sealing ring ⓐ ⓑ ➡ Remove the threaded blanking plug of the side cable entry (use a suitable coin or a large flat-blade screwdriver). Rev. 2.0.0 | © 2019 Dallmeier | www.dallmeier.com...
- Page 27 Commissioning DDF5(X)50HDV-DN-SM ❹ ➡ Securely seal the unused cable entry with the existing threaded blanking plug and the corresponding sealing ring. Rev. 2.0.0 | © 2019 Dallmeier | www.dallmeier.com...
- Page 28 DDF5(X)50HDV-DN-SM Commissioning ❺ ⓐ ⓐ Rubber gasket (adhesive-backed) ➡ Remove the paper backing from the self-adhesive rubber gasket. ➡ Adhere the gasket to the bottom of the housing base. Rev. 2.0.0 | © 2019 Dallmeier | www.dallmeier.com...
- Page 29 ➡ Observe the chapter “Interfaces” on page 38. ➡ Route the required cables through the cable entry. NOTICE: Use the supplied PG16 cable gland (or an equivalent type) for optimum tightness. ➡ Carry out the cabling. Rev. 2.0.0 | © 2019 Dallmeier | www.dallmeier.com...
- Page 30 3-axis camera gimbal as shown on page 32. ⓐ ⓑ ⓐ Drill hole (3×) ⓒ ⓑ Dowel/anchor (3×) ⓒ O-ring (3×) ⓓ Mounting screw (3×) ⓓ Rev. 2.0.0 | © 2019 Dallmeier | www.dallmeier.com...
- Page 31 ➡ Mount the housing base with three screws (incl. O-rings) to the ceiling/wall. NOTICE: Tighten the three mounting screws slowly and with normal force to avoid damage to the O-rings. Rev. 2.0.0 | © 2019 Dallmeier | www.dallmeier.com...
- Page 32 DDF5(X)50HDV-DN-SM Commissioning ❽ ⓐ Knurled thumb screw (roll axis) Tilt: Max. ±45° ⓐ ⓐ Roll: Max. ±180° Pan: 45° Max. ±90° Maximum permissible pan, tilt and roll range Rev. 2.0.0 | © 2019 Dallmeier | www.dallmeier.com...
- Page 33 ➡ Adjust the focal length (zoom) and the focus position in the “Lens control” camera dialog. ➡ Repeat the last two steps until the captured scene meets your require- ments. Rev. 2.0.0 | © 2019 Dallmeier | www.dallmeier.com...
- Page 34 ➡ Attach the housing cover (including the bubble) back to the housing base. NOTICE: Make sure that the ambient light sensor is not covered by the black inner liner (rotate the bubble as required). Rev. 2.0.0 | © 2019 Dallmeier | www.dallmeier.com...
- Page 35 ➡ Before re-attaching the housing cover, make sure that the O-ring is seated correctly (right figure) to ensure optimum tightness. To simplify insertion into the provided groove, slightly overstretch the O-ring several times beforehand. Rev. 2.0.0 | © 2019 Dallmeier | www.dallmeier.com...
- Page 36 ➡ Tighten the three tamper-resistant torx screws (Torx-TR 20) of the housing cover using a torx screwdriver with hollow point (T20 H). NOTICE: Observe the maximum permissible torque of 1.0 Nm to prevent damage to the O-rings of the housing screws. Rev. 2.0.0 | © 2019 Dallmeier | www.dallmeier.com...
- Page 37 Commissioning DDF5(X)50HDV-DN-SM Rev. 2.0.0 | © 2019 Dallmeier | www.dallmeier.com...
-
Page 38: Interfaces
DDF5(X)50HDV-DN-SM Commissioning 9 Interfaces ⓐ ⓗ ⓖ ⓕ ⓔ ⓓ ⓑ ⓒ Rev. 2.0.0 | © 2019 Dallmeier | www.dallmeier.com... - Page 39 Audio Line OUT (3.5 mm phone jack) ⓔ Audio Line IN (3.5 mm phone jack) ⓕ LAN / PoE (RJ45 jack, PoE conformity IEEE 802.3af) ⓖ Power IN (Weidmüller male connector SL 3.50/02/90G) ⓗ Flexible cable fastener (2×) Rev. 2.0.0 | © 2019 Dallmeier | www.dallmeier.com...
-
Page 40: Pin Assignment
Line OUT (stereo) Left channel Left channel Ring Right channel Right channel Sleeve Ground Ground Audio Line IN (stereo) Input level: max. 2.83 V Input impedance: 29 kΩ Audio Line OUT (stereo) Output level at 10 kΩ load: max. 3.11 V Output impedance: 320 Ω Rev. 2.0.0 | © 2019 Dallmeier | www.dallmeier.com... - Page 41 (mating connector: Weidmüller BL 3.50/02/180 SN) In order to comply with UL’s requirements, only use a UL certified “Limited Power Source (LPS)” power supply unit when powering the device by an exter- nal DC power supply unit. Rev. 2.0.0 | © 2019 Dallmeier | www.dallmeier.com...
-
Page 42: Inserting A Memory Card
DDF5(X)50HDV-DN-SM Commissioning 11 Inserting a Memory Card ⓐ ⓐ microSDXC card (optional) Rev. 2.0.0 | © 2019 Dallmeier | www.dallmeier.com... - Page 43 ➡ Only use memory cards that have been tested and approved by Dallmeier (failure to do so may result in the loss of warranty). Damage to the device or memory card due to incorrect card insertion ➡...
-
Page 44: Connection, First-Time Access And Login
11 (Windows 7) Microsoft Edge (Windows 10) Google Chrome Mozilla Firefox (latest available version of each browser) Browser settings JavaScript enabled Ethernet 100 Mbps Sound Sound card or on-board sound chip (min. 16 bit) Rev. 2.0.0 | © 2019 Dallmeier | www.dallmeier.com... -
Page 45: Connection
➡ Confirm the input. The connection to the device is then established. After the successful connection to the device and before the very first login, a system security dialog for the first-time access is displayed. Rev. 2.0.0 | © 2019 Dallmeier | www.dallmeier.com... -
Page 46: First-Time Access
➡ Enter a new password for the default administrator account and confirm your input (the strength of the selected password is displayed during input). ➡ Click “OK”. After the first successful access to the device, the login dialog is displayed. Rev. 2.0.0 | © 2019 Dallmeier | www.dallmeier.com... -
Page 47: Login
After the successful login, the graphical user interface of the configuration mode is displayed. ➡ Configure all required settings (e.g. zoom and focus position). ➡ Finally, click “LOGOUT” to properly log out of the device. Rev. 2.0.0 | © 2019 Dallmeier | www.dallmeier.com... -
Page 48: Technical Product Specification (Basic Data)
• 100BASE-TX • PoE (IEEE 802.3af) Memory card slot 1× (microSDXC compatible) Power IN 1× Weidmüller male connector SL 3.50/02/90G (mating connector: Weidmüller BL 3.50/02/180 SN) Additional Features Ambient light sensor 1× Rev. 2.0.0 | © 2019 Dallmeier | www.dallmeier.com... - Page 49 Bubble Clear (with black inner liner) Vandal-resistant IK protection IK10 protection against external mechanical impacts (up to 20 joules) IP rating IP67 Color White Dimensions Approx. Ø 152 × H 134 mm (Ø 5.98" × H 5.27") Weight Approx. 1100 g (2.4 lb) Rev. 2.0.0 | © 2019 Dallmeier | www.dallmeier.com...
- Page 50 The technical product specification (basic data) in this document is based on the information at the time of this document’s compilation. Detailed information and possible updates can be found in the currently valid product specification on www.dallmeier.com. Rev. 2.0.0 | © 2019 Dallmeier | www.dallmeier.com...
-
Page 51: Dimensions
Commissioning DDF5(X)50HDV-DN-SM 14 Dimensions 151.93 mm (5.98") Ø 120 mm (4.72") 45 mm (1.76") Ø 4.5 mm (0.18") 113.83 mm (4.48") Rev. 2.0.0 | © 2019 Dallmeier | www.dallmeier.com... - Page 52 Dallmeier electronic GmbH & Co.KG Bahnhofstr. 16 · 93047 Regensburg · Germany Phone +49 941 8700-0 · Fax +49 941 8700-180 www.dallmeier.com · info@dallmeier.com...