Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for dallmeier DDF5 00HDV-DN-IM Series
Summary of Contents for dallmeier DDF5 00HDV-DN-IM Series
- Page 1 DDF5(X)00HDV-DN Commissioning English 005316 / 1.0.5 / 2018-12-19...
- Page 2 Mozilla and Firefox of Mozilla Foundation headquartered in Mountain View, California, USA. Third-party trademarks are named for information purposes only. Dallmeier electronic respects the intellectual property of third parties and always attempts to ensure the com- plete identification of third-party trademarks and indication of the respective holder of rights.
-
Page 3: Table Of Contents
4 Safety Instructions 5 General Notes Scope of Delivery Transportation and Packaging Warranty Approvals/Certifications Appropriate Use Operation 6 Requirements Ambient Conditions Power Supply 7 Maintenance 8 Installation 9 Pin Assignment 10 Connection and Login Connection Login 11 Technical Specifications 12 Dimensions www.dallmeier.com... -
Page 4: Validity
Always follow the instructions, notes and warnings and observe the technical specifications in the product data sheet. Keep all documents in legible condition and in a suitable location for future refer- ence. Regularly check the website www.dallmeier.com for the latest updates on product documentation. www.dallmeier.com... -
Page 5: This Document
The document “Data Sheet” contains detailed technical specifications, features and characteristics of the device. The target audience of the document is trained system integrators. Configuration The document “Configuration” contains detailed descriptions on the configuration of the device. The target audience of the document is trained system integrators. www.dallmeier.com... -
Page 6: Typographical Conventions
WARNING indicates a hazardous situation which, if not avoided, could result in death or serious injury. CAUTION CAUTION indicates a hazardous situation which, if not avoided, could result in minor or moderate injury. NOTICE NOTICE is used to address practices not related to physical injury. www.dallmeier.com... - Page 7 “Expressions” in quotation marks generally indicate a control element on the device (switches or labels) or on its user interface (buttons, menu items). Paragraphs in italics provide information on basic principles, special features and efficient procedure as well as general recommendations. www.dallmeier.com...
-
Page 8: Safety Instructions
• System Components Only use internal components that have been tested and approved by Dallmeier. Inappropriate internal components may cause malfunctions, damages and data loss and may result in the loss of warranty. - Page 9 To avoid damage to the device by electrical surge during lightning storms, all protective measures, which are specified by the currently valid DIN, VDE and ISO standards and which provide for a standard-compliant lightning protection equipotential bonding, are mandatory and must be fulfilled by all means. www.dallmeier.com...
- Page 10 The device may only be opened by qualified personnel for commissioning, inspection, maintenance and repair. • Disposal Do not dispose waste electrical and electronic equipment into the household trash. Disconnect the device from the power supply. Remove all connected devices. Return the device to your respective sales partner. www.dallmeier.com...
-
Page 11: General Notes
Transportation and Packaging Store the original packaging for later transportation. Dallmeier is not responsible for any damage resulting from unprofessional/im- proper transportation. The device should only be shipped in the original packaging. If the original packaging is no longer available, ensure that the used packaging suf- ficiently protects the device against damage, moisture, heat and cold. -
Page 12: Warranty
The following approvals/certifications were valid for the device at the time of this document’s compilation: • CE, FCC, RCM, UL, DIN 50130-4 compliant Visit www.dallmeier.com for possible updates. Note (USA) This equipment has been tested and found to comply with the limits for a Class A digital device, pur- suant to Part 15 of the FCC Rules. -
Page 13: Operation
• The accuracy of the automatic white balance (AWB) algorithm depends on the used lighting. Mixed light (consisting of artificial light and daylight) may cause color distortions (inaccurate color reproduction). • Poor lighting can lead to an incorrect white balance. www.dallmeier.com... -
Page 14: Requirements
• with strong heat emissions (e.g. radiator), • with improper ambient temperatures, • near sources with strong radiation (e.g. radio transmitters, magnetic fields), • with corrosive surroundings (e.g. gases, salt water), • with insufficient air ventilation (e.g. closed cabinet). www.dallmeier.com... -
Page 15: Power Supply
NOTICE Damage to the device resulting from improper power supply ➡ Always ensure the correct polarity when using a separate power supply unit. ➡ Do not use PoE (Power over Ethernet) and a separate power supply unit simultaneously. www.dallmeier.com... -
Page 16: Maintenance
• Do not rub the plastic bubble with a dry cloth. • Do not use common glass cleaners. • Avoid excessive rubbing. • Dry gently with a clean dry cloth to avoid scratching the surface. www.dallmeier.com... -
Page 18: Installation
• Drywall utility saw or jigsaw • M6 eye bolt • Torx screwdriver with hollow point (T20 H) for tamper-resistant 6-lobe security screw with pin (Torx-TR 20) • Ceiling hook, safety wire and carabiner • Phillips screwdriver • PG16 cable gland www.dallmeier.com... - Page 19 Commissioning DDF5(X)00HDV-DN-IM ❶ ⓐ Torx screwdriver (T20 H) ⓐ www.dallmeier.com...
- Page 20 DDF5(X)00HDV-DN-IM Commissioning ⓐ 3× Tamper-resistant torx screw (Torx-TR 20) ⓐ ➡ Loosen the three tamper-resistant torx screws (Torx-TR 20) of the cover ring with a torx screwdriver (T20 H). www.dallmeier.com...
- Page 21 Commissioning DDF5(X)00HDV-DN-IM ❷ ➡ Remove the cover ring/bubble. www.dallmeier.com...
- Page 22 DDF5(X)00HDV-DN-IM Commissioning ❸ ⓐ M6 eye bolt ⓑ ⓐ Ceiling clamp (2×) ⓑ ➡ Screw the M6 eye bolt onto the bottom side of the housing. www.dallmeier.com...
- Page 23 Commissioning DDF5(X)00HDV-DN-IM ❹ ⓐ Ø 143 mm ⓑ Ceiling hook ⓑ ⓐ ➡ Cut a circular hole (Ø 143 mm) into the suspended ceiling or ceiling panel. ➡ Screw a ceiling hook into the supporting structure. www.dallmeier.com...
- Page 24 Observe the intended viewing direction and the maximum allowable pan, tilt and rotation movements (angle values) as illustrated on page 33 before mounting the camera. ⓐ ⓐ Basic position of ceiling clamp ➡ Insert the housing into the circular cut-out. www.dallmeier.com...
- Page 25 Commissioning DDF5(X)00HDV-DN-IM ❻ ⓑ ⓐ Carabiner ⓐ ⓑ Safety wire ➡ Attach a safety wire to the M6 eye bolt (use a carabiner) and the ceiling hook. www.dallmeier.com...
- Page 26 DDF5(X)00HDV-DN-IM Commissioning ❼ ⓐ ⓐ M4 locking screw (ceiling clamp) ⓑ Phillips screwdriver ⓑ www.dallmeier.com...
- Page 27 Commissioning DDF5(X)00HDV-DN-IM Locked ceiling clamp (2×) ➡ Tighten the M4 locking screw of both ceiling clamps with a Phillips screw- driver until the housing is securely fixed. www.dallmeier.com...
- Page 28 DDF5(X)00HDV-DN-IM Commissioning ❽ ⓐ PG16 cable gland ⓐ ➡ Run the required cables through a PG16 cable gland and screw the PG16 cable gland in the appropriate thread on the bottom side of the housing. www.dallmeier.com...
- Page 29 Commissioning DDF5(X)00HDV-DN-IM www.dallmeier.com...
- Page 30 DDF5(X)00HDV-DN-IM Commissioning ❾ ⓐ ⓗ ⓖ ⓕ ⓔ ⓓ ⓑ ⓒ ➡ Connect the required cables to the connectors of the camera module. www.dallmeier.com...
- Page 31 Power IN (Weidmüller male connector SL 3.50/02/90G) ⓗ Flexible cable fastener (2×) You can disable the LAN LEDs in the “WebConfig” user interface of the camera. For more information and detailed descriptions of the possible LAN LED states, read the documentation on camera configuration. www.dallmeier.com...
- Page 32 DDF5(X)00HDV-DN-IM Commissioning ❿ ⓐ ⓐ microSDHC 32 GB, Class 10, UHS-I (optional) www.dallmeier.com...
- Page 33 Knurled locking screw “Rotation” The specified maximum allowable angle values are based on the factory default viewing direction (as illustrated above). ⓐ Always loosen both knurled locking screws before rotating the lens/sensor unit (moderately tighten the screws by hand again when finished). www.dallmeier.com...
- Page 34 DDF5(X)00HDV-DN-IM Commissioning ⓬ ⓑ ⓐ www.dallmeier.com...
- Page 35 The camera is equipped with a motor-driven varifocal lens. The focal length (zoom) and the focus are adjusted over the network in the “WebConfig” user interface of the camera (more information can be found in the documentation on camera configuration). www.dallmeier.com...
- Page 36 DDF5(X)00HDV-DN-IM Commissioning ⓭ ⓐ Black inner dome cover ⓐ ➡ Attach the cover ring to the housing while ensuring that the ambient light sensor is not covered by the black inner dome cover. www.dallmeier.com...
- Page 37 Commissioning DDF5(X)00HDV-DN-IM ➡ Tighten the three tamper-resistant torx screws (Torx-TR 20) of the cover ring with a torx screwdriver (T20 H). www.dallmeier.com...
-
Page 38: Pin Assignment
Weidmüller male connector SL 3.50/02/90G (mating connector Weidmüller BL 3.50/02/180 SN) In order to comply with UL’s requirements, always use a UL-certified, Limited Power Source (LPS) Class 2 power supply unit when operating the device with a separate power supply unit. www.dallmeier.com... - Page 39 Line OUT (stereo) Left channel Left channel Ring Right channel Right channel Sleeve Ground Ground Audio Line IN (stereo) Input level: max. 2.83 V Input impedance: 29 kΩ Audio Line OUT (stereo) Output level at 10 kΩ load: max. 3.11 V Output impedance: 320 Ω www.dallmeier.com...
-
Page 40: Connection And Login
Web browser Microsoft Internet Explorer 11 (Windows 7) Microsoft Edge (Windows 10) Google Chrome Mozilla Firefox (latest available version of each browser) Browser settings JavaScript enabled Ethernet 100 Mbps (or more) Sound Sound card or on-board sound chip (min. 16 bit) www.dallmeier.com... -
Page 41: Connection
➡ Enter the IP address of the device into the address bar of the web browser. ➡ Confirm the input. The connection to the device is then established. After the successful connection to the device, the login dialog is displayed. www.dallmeier.com... -
Page 42: Login
➡ Enter your login credentials. ➡ Confirm with “OK”. After the successful login, the graphical user interface of the configuration mode is displayed. ➡ Configure the required settings. ➡ Finally click “LOGOUT” to log out of the device. www.dallmeier.com... -
Page 44: Technical Specifications
1× RJ45 female connector, 10BASE-T/100BASE-TX/1000BASE-T PoE Memory card slot 1× microSDHC 32GB, Class 10, UHS-I Power IN 1× Weidmüller male connector SL 3.50/02/90G Electrical Data Voltage supply 24 V DC or PoE (Class 0) PoE standard IEEE 802.3af Power consumption Max. 6 W www.dallmeier.com... - Page 45 Approx. 1200 g (2.6 lb) Environmental Conditions Suitable installation sites Indoor Operating temperature −20 °C to +50 °C (−4 °F to 122 °F) Relative humidity 0 % – 90 % RH, non-condensing For detailed technical specifications and possible updates, see the current product data sheet (available on www.dallmeier.com). www.dallmeier.com...
-
Page 46: Dimensions
DDF5(X)00HDV-DN-IM Commissioning 12 Dimensions 170 mm (6.69") 62 mm (2.44") 60 mm (2.36") 142 mm (5.59") 114.60 mm (4.51") 28.80 mm (1.13") 14 mm (0.55") www.dallmeier.com... - Page 48 Dallmeier electronic GmbH & Co.KG Bahnhofstr. 16 · 93047 Regensburg · Germany Phone +49 941 8700-0 · Fax +49 941 8700-180 www.dallmeier.com · info@dallmeier.com...