SIGNALCORE SC5511A Operating & Programming Manual page 49

R
E V I S I O N
Rev 0.1 Development release
Rev 1.0 Initial Release, April 23 2015
Rev 1.0.1 Corrected table 43 for register 25, May 13 2015
Rev 1.0.2 Corrected API function syntax
Rev 1.0.3 Corrected figure 6 wording, July 20 2015
Rev 1.1.0 Added RS-232 section, July 23 2015
Rev 1.2.0 Modified function sc5511a_set_synth_mode. Only for firmware v1.1 or later
Rev 1.3.0 Added the sc5511a_synth_self_cal function.
Rev 1.4.0 Modified RS232 write instructions for devices with firmware >2.1
1) Added ability to change the phase of the signal on CH1 with resolution
limitation for lower frequencies. Only for firmware versions 2.5 and
Rev 1.5.0
higher. Contact SignalCore for firmware updates.
2) Corrected and updated Table 39.
Rev 1.6.0 Function deleted, not applicable.
Rev 1.7.0 Corrected API function syntax
SC5511A User Manual
N
O T E S
Rev 1.7.0
Date
10-21-16
08-03-18
1-29-19
5-22-19
45