Sc5511A_Set_Alc_Mode; Sc5511A_Set_Standby; Sc5511A_Set_Clock_Reference; Sc5511A_Set_Reference_Dac - SIGNALCORE SC5511A Operating & Programming Manual

Function:

sc5511a_set_alc_mode

Definition: int sc5511a_set_alc_mode(sc5511a_device_handle_t
Input: sc5511a_device_handle_t
unsigned char
Description: sc5511a_set_alc_mode set the ALC to close (0) or open (1) mode operation for channel
RF1.
Function:

sc5511a_set_standby

Definition: int sc5511a_set_standby(sc5511a_device_handle_t
Input: sc5511a_device_handle_t
unsigned char
Description: sc5511a_set_standby if enabled powers down channel RF1.
Function:

sc5511a_set_clock_reference

Definition: int sc5511a_set_clock_reference(sc5511a_device_handle_t
Input: sc5511a_device_handle_t
unsigned char
unsigned char
Description: sc5511a_set_clock_reference configure the reference clock behavior.
Function:

sc5511a_set_reference_dac

Definition: int sc5511a_set_reference_dac(sc5511a_device_handle_t
Input: sc5511a_device_handle_t
unsigned short
Description: sc5511a_set_reference_dac set the DAC value that controls the TCXO frequency.
Function:

sc5511a_set_alc_dac

Definition: int sc5511a_set_alc_dac(sc5511a_device_handle_t
Input: sc5511a_device_handle_t
unsigned short
Description: sc5511a_set_alc_dac set the value of the ALC DAC to make amplitude adjustments.
SC5511A User Manual
*dev_handle
mode
*dev_handle
enable
*dev_handle
select_freq
lock_external
*dev_handle
dac_value
*dev_handle
dac_value
Rev 1.7.0
*dev_handle,
unsigned char
(handle to the opened device)
(ALC close/open)
*dev_handle,
unsigned char
(handle to the opened device)
(enables/disables standby)
*dev_handle,
unsigned char select_freq
unsigned char
(handle to the opened device)
(selects 10 MHz or 100 MHz)
(locks to external reference)
*dev_handle,
unsigned short
(handle to the opened device)
(DAC value to be written)
*dev_handle,
unsigned short
(handle to the opened device)
(DAC value to be written)
mode)
enable)
lock_external)
dac_value)
dac_value)
35