Job Mode - Yamaha MDF3 Owner's Manual

JOB M
ODE
The five JOB mode functions are related to the recording and playback of
sequence data files. They allow you to play back SEQ data files repeatedly,
or in a programmed order; to change the playback tempo that is recorded to
sequence data files; and to control how the MDF3 synchronizes recording
and playback with other MIDI sequencers.
Selecting a JOB mode function
To use a JOB mode function, first press the JOB key, then use the FILE DATA keys to
select the function. When the name of the desired function is displayed in the LCD,
press the START/STOP key.
01:~~Repeat~play
Note that you must place a disk in the disk drive before you select "Repeat play" or
"Prog play" in order to use these function.
Exiting a JOB mode function
When you have finished making settings using one of the JOB mode functions, you
can exit the function by pressing any of the mode selection keys.
39