YOODA SMART CONTROL UNIT Manual page 5

www.sukcesgroup.pl
In order to fully explore available functions of YOODA SMART CONTROL UNIT (YSC_UNIT) please take a moment and read this manual before using
the device.
All devices work on 433 MHz frequency.
3. First start-up
3.4 Connecting by Ethernet cable
Included Ethernet cable should be plugged into back panel of the control unit and to free output slot in working
router.
4. Mobile app - interface description
Yooda SmartControl
My home My scenarios Settings YOODA shop
All
Cinema room
Living room
App has 4 main tabs:
My home - controlling devices
and group of devices,
My scenarios - adding,
configuration and turning
on/off created time scenarios,
Setting - adding and editing
devices, adding and editing
groups of devices, changing
control unit settings (work
mode, connection settings,
password) and changing
language,
YOODA SMART CONTROL UNIT
Yooda SmartControl
Find Smart Control Unit
Connect remotely
After connecting control
unit to router by Ethernet
cable run app and select
"Find SmartControl Unit".
Than choose Wi-Fi network
generated by the router (not
by the Smart Control unit).
LAN
17
8
11
YOODA shop - redirects to
www.sukcesgroup.pl web
page.
To change the tab simply
slide screen horizontally or
press the tab.
Yooda SmartControl
Find Smart Control Unit
192 168 1 1
Connect
Connect remotely
After successfully connecting
to the network, control unit
is ready to work.
Yooda SmartControl
LAN
My home My scenarios Settings YOODA shop
All 17
Cinema room
Living room 11
Status bar informs us on
work mode.
LAN - control unit works in
local network,
NET - remote access service,
connection to internet,
DEMO - app is in demo mode,
8
OK - instructions were
performed successfully,
WORK - app waits for
confirmation.