Demo Version - YOODA SMART CONTROL UNIT Manual

www.sukcesgroup.pl
In order to fully explore available functions of YOODA SMART CONTROL UNIT (YSC_UNIT) please take a moment and read this manual before using
the device.
All devices work on 433 MHz frequency.
192.168.1.1/index.php
Click group to control individual devices.
All
Cinema room
Living room
Enter IP into address bar of browser of computer connected to the same local Wi-Fi network as the control unit.
Click group to control individual devices.
All
Cinema room
Living room
After choosing group of devices control buttons will be displayed. By using 'PL|ENG' buttons language version can be
changed.

7. Demo version

Demo version was designed to show all the possibilities of the YOODA SMART CONTROL app.
For the app to work in DEMO mode there is no need to connect to any control unit. App is equipped with exemplary setting.
Yooda SmartControl
0
To run DEMO version choose 'Demo
version'.
YOODA SMART CONTROL UNIT
Devices
Devices
Yooda SmartControl
Find Smart Control Unit
My home
0 0 0
Connect
Demo version
Exemplary programmed control unit
with prepared app is being presented.
Whenever using DEMO version its
name is being shown in top right
of the app.
Szukaj
Devices
Devices
Devices
Szukaj
Devices
Devices
Devices
Outside shutter 1
Outside shutter 2
DEMO
My scenario Settings YOODA shop
All 17
Ground floor 8
Garage 11
First floor 8
Garden 2
PL / ENG Log out
Log out
PL / ENG
Yooda SmartControl
LAN
My home My scenario Settings YOODA shop
Devices groups
Network connections
Date, time
Advanced
Close demo
To end DEMO version choose 'Close
demo' in 'Setting' tab.