YOODA SMART CONTROL UNIT Manual page 8

www.sukcesgroup.pl
In order to fully explore available functions of YOODA SMART CONTROL UNIT (YSC_UNIT) please take a moment and read this manual before using
the device.
All devices work on 433 MHz frequency.
5. Configuration and work mode
5.5 Connecting YSC unit to local Wi-Fi
After running control unit for the first time, in its default mode, it generates own Wi-Fi network that we can log into. After
that there's a possibility to connect unit to other, already existing, Wi-Fi network. For returning the control unit to default
mode press 'Reset' button on the back panel of the control unit.
Yooda SmartControl
My scenario Moje scenariusze Settings YOODA shop
Devices
Devices groups
Network connections
Date, time
Advanced
Using 'Settings' tab choose 'Network
connections'.
Yooda SmartControl
Wireless network configuration (WLAN)
Network mode
Connect to home Wi-Fi network
Network name
SmartControl
Network encryption mode
None
Use data from router (DHCP)
Configure manually
Cancel
In Android system choose network
using 'Choose Wi-Fi network'
button. In iOS enter name of
the network.
Yooda SmartControl
192
After logging in press 'Find Smart
Control unit'.
YOODA SMART CONTROL UNIT
Yooda SmartControl
LAN
Network connections
Cable network settings
Received automatically from net (DHCP)
Wireless network configuration (WLAN)
Provide own Wi-Fi network
Network name SmartControl
Channel 7
Encryption Network is not encrypted
Received automatically from net (DHCP)
Close
Choose 'Wireless network
configuration'.
Choose Wi-Fi network
Save
Choose network encryption mode,
enter password and press 'OK'.
Yooda SmartControl
Find Smart Control Unit
168 1 1
Connect
Connect remotely
Message will be shown after
finding Smart Control unit.
Yooda SmartControl
Network connections
Network mode
Provide own WiFi network
Network name
SmartControl
Kanał 7
Network encryption mode
None
Cancel
Yooda SmartControl
Wireless network configuration (WLAN)
Network name
Choose Wi-Fi network
YOODASC
Network encryption mode
WPA2-PSK
Network access password
|
Show password
Use data from router (DHCP)
Configure manually
Cancel Save
Find Smart Control Unit
192 168 1 1
Finding Smart Control Unit
Połącz
Smart Control Unit was found
OK
Connect remotely
Yooda SmartControl
Network connections
Network mode
Provide own WiFi network
Network name
SmartControl
Turned off
Kanał 1
Connect to home Wi-Fi network
Metoda szyfrowania sieci
Provide own Wi-Fi network
Brak
OK Cancel
Change network mode to 'Connect
to home Wi-Fi network'.
Yooda SmartControl
Connection between mobile device and Smart Control unit is lost.
Please log your device to the same network as the unit.
Choose Wi-Fi network
Continue
Message informing about disconnection
from current Wi-Fi network will be shown.
Log in to local Wi-Fi network by choosing
'Wi-Fi' and pressing 'Continue'.
Yooda SmartControl
Find Smart Control Unit
192 168 1 1
Connect
Connect remotely
New IP address of Smart Control
unit will be shown. Press 'Connect'.
OK