Advertisement
Quick Links
Sadie Three Drawers
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
A
B
C
bolt
dowel
locking
x60
x16
nut x60
I
G
H
I2
I1
wedge
screw
slide
x8
x8
rail x3
Hardware Supplied
Phillips screwdriver and hammer required
For quicker assembly, we recommend the use of a power drill on a low-speed setting.
Please clear any loose wood from the locking nut holes before inserting the nut to ensure it locks 100%.
mocka.co.nz | mocka.com.au
| PO BOX 6171, Maroochydore, QLD, 4558
F
D
E
small
screw
screw
screw x36
x12
x8
J
K
L
J1
J2
plastic
allen key
slide
x1
glide x6
rail x3
WARNING:
W
V
potential to tip over in certain circumstances, i.e. if a child
attempts to climb up on the furniture or in the event of an
earthquake. Accordingly, we recommend that all furniture is
anchored to a wall. We supply a free safety wall anchor with all
furniture sold and we recommend these are used to prevent
your product tipping. The fixing device provided should fit most
wall types, but please note that different wall materials may
require different fixing devices from those supplied.
safety
screw
x1
strap x1
X
Y
wall
wall
anchor
screw
x1
x1
Z
washer
x2
Wall Strap
Any furniture that is not anchored to a wall has the
1
Advertisement
Related Manuals for Mocka Sadie Three Drawers
Summary of Contents for Mocka Sadie Three Drawers
- Page 1 Sadie Three Drawers Assembly Instructions Thank you for your purchase. Please follow the instructions below for correct assembly. WARNING: Any furniture that is not anchored to a wall has the potential to tip over in certain circumstances, i.e. if a child attempts to climb up on the furniture or in the event of an earthquake.
- Page 2 Sadie Three Drawers Assembly Instructions Attach 3x slide rails (L1) to panel [4] using 9x screws (D). Attach 3x Attach 3x slide rails (L1) to panel [4] using 9x screws (D). Attach 3x Insert 10x bolts (A) into panel [4] and 10x bolts (A) into panel [5]. Insert Insert 10x bolts (A) into panel [4] and 10x bolts (A) into panel [5].
- Page 3 Sadie Three Drawers Assembly Instructions Insert 2x dowels (C) into panel [6] and 2x dowels (C) into panel [7] as Attach panels [20] to panels [6] and [7] as shown and secure with 4x shown. Attach panel [3] to panels [6] and [7] using 4x screws (F) and locking nuts (B).
- Page 4 Sadie Three Drawers Assembly Instructions Attach panels [8] and [15] to panel [5] as shown, and secure with 8x Attach panels [8] and [15] to panel [5] as shown, and secure with 8x Attach left panel [20] to panel [5], then attach panels [8], [15] and right Attach left panel [20] to panel [5], then attach panels [8], [15] and right locking nuts (B).
- Page 5 Sadie Three Drawers Jolt Wardrobe Assembly Instructions ASSEMBLY INSTRUCTIONS Insert 12x bolts (A) into panel [1]. Attach each panel [10] to panel [1] using 4x locking nuts (B). Tighten with a screwdriver. mocka.co.nz | mocka.com.au mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 6 Sadie Three Drawers Assembly Instructions Insert 8x dowels (C) into top panel [1]. Attach top panel [1] Slide panels [9] down along the grooves between panel [5] and [4]. to panels [4], [5], [6] and [7]. Secure with 8x locking nuts (B) and tighten with the allen key (L).
- Page 7 Sadie Three Drawers Assembly Instructions Insert 4x dowels (C) into the tops of panels [4] and [5]. Attach panel [2] to panels [4] and [5] and secure with 4x screws (F). Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 8 Sadie Three Drawers Assembly Instructions Insert 8x bolts (A) into panel [2]. Insert 2x bolts (A) into each panel [22]. Attach panels [14] and [11] together using 4x locking nuts (B). Tighten with a screwdriver. Insert 6x plastic glides (K) into panels [11] and [14] as shown.
- Page 9 Sadie Three Drawers Assembly Instructions strap Attach panels [14] and [11] to panel [2] using 8x locking nuts (B). Attach 8x wedges (G) to the back of the unit as shown and secure using Tighten with a screwdriver. 8x screws (H). Attach 1x safety strap (V) and 1x washer (Z) to top panel and secure with 1x screw (W).
- Page 10 Sadie Three Drawers Assembly Instructions Drawers x3 Drawers x3 Insert 4x bolts (A) into panel [12]. Insert 8x bolts (A) into panels [13]. Insert 4x bolts (A) into panel [12]. Insert 8x bolts (A) into panels [13]. Attach back panels [18] to the side panels using 12x screws (E). Attach Attach back panels [18] to the side panels using 12x screws (E).
- Page 11 Sadie Three Drawers Assembly Instructions strap wall plug screw Insert the drawers into the unit as shown. Ensure the drawers slide Lift the furniture into the desired location, do not drag. Use a drill to smoothly and easily along the rails.
Need help?
Do you have a question about the Sadie Three Drawers and is the answer not in the manual?
Questions and answers