Door Bottom Panel Drawer Front Drawer Front Shelf Panel left Side Panel Rail Right Side Panel Left Drawer Side Divider Right Drawer Side Divider Drawer Back Divider Drawer Base Rail Rail Back Panel Rail Shelf Panel Rail mocka.co.nz I mocka.com.au...
The fixing device provided should fit most wall types, but please note that different wall materials may require different fixing devices from those supplied. Phillips & Flathead screwdrivers and hammer required For quicker assembly, we recommend the use of a power drill on a low-speed setting. mocka.co.nz I mocka.com.au...
Page 15
Hardware Needed Insert 4 x shelf plug (M) into panels [4, 8]. Rest the shelf panels [11] onto shelf plug (M). Ensure the shelves are balanced and stable. mocka.co.nz I mocka.com.au...
Page 16
Sadie Buffet Hardware Needed Hardware Needed NOTE: If the doors are uneven or there is a gap in the middle, loosen or tighten the screw on the door hinge until they are sitting flush. mocka.co.nz I mocka.com.au...
Page 17
Buffet Hardware Needed wall anchor screw Note: Seek advice from a qualified trades person on how to attach this safety strap to your specific wall. Once assembled lift furniture into place, do not drag. You’re done, enjoy! mocka.co.nz I mocka.com.au...
Page 18
MOVE DOOR OUTWARD by turning this screw clockwise by turning this screw counter-clockwise STEP 4 Adjust the Gap beteen door panel and side panel MOVE DOOR BACK OR Loosen this screw a bit. Re-tighten this screw. FORTH mocka.co.nz I mocka.com.au...
Need help?
Do you have a question about the Sadie and is the answer not in the manual?
Questions and answers