Mocka Sadie Assembly Instructions Manual
Six cube unit
Hide thumbs
Also See for Sadie:
- Assembly instructions manual (18 pages) ,
- Manual (18 pages) ,
- Assembly instructions (5 pages)
Table of Contents
Advertisement
Quick Links
Sadie
Six Cube Unit
Thank you for your purchase.
Please follow the instructions below for correct assembly
A
B
dowel
long
x12
bolt x8
G
H
large
wedge
dowel x8
x8
WARNING: Any furniture that is not anchored to a wall has the potential to tip over in certain
circumstances, i.e. if a child attempts to climb up on the furniture or in the event of an earth-
quake. Accordingly, we recommend that all furniture is anchored to a wall. We supply a free safety
wall anchor with all furniture sold and we recommend these are used to prevent your product
tipping. The fixing device provided should fit most wall types, but please note that different wall
materials may require different fixing devices from those supplied.
.
mocka.co.nz I mocka.com.au I PO BOX 18, Pinkenba QLD 4008
C
D
bolt
locking
bolt
nut x16
x16
I
J
screw
Allen
felt pad
Key
x8
x8
x1
Hardware Supplied
Phillips & Flathead screwdrivers
and hammer required
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
E
F
long
x 4
dowel x4
K
V
W
X
safety
screw
wall
x1
strap x1
anchor
screw
x1
Wall Strap
Y
Z
wall
washer
x2
x1
Advertisement
Table of Contents
Related Manuals for Mocka Sadie
Summary of Contents for Mocka Sadie
- Page 1 fixing devices from those supplied. Phillips & Flathead screwdrivers and hammer required For quicker assembly, we recommend the use of a power drill on a low-speed setting. mocka.co.nz I mocka.com.au I PO BOX 18, Pinkenba QLD 4008...
- Page 2 Sadie Six Cube Unit Panel layout Insert 8x bolts (C) into panel [1]. Tighten with a screwdriver. mocka.co.nz I mocka.com.au I PO BOX 18, Pinkenba QLD 4008...
- Page 3 Sadie Six Cube Unit Insert 4x bolts (C) into panel [3] and panel [4]. Tighten with a screwdriver. Insert 4x bolts (C) into panel [7]. Tighten with a screwdriver. mocka.co.nz I mocka.com.au I PO BOX 18, Pinkenba QLD 4008...
- Page 4 Attach panels [6] to panel [7] with 4x long dowels (F) and secure Attach panels [6] to panel [7] secure with 4x locking nuts (D). with 4x bolts (E). Tighten with an Allen key (J). Tighten with a screwdriver. mocka.co.nz I mocka.com.au I PO BOX 18, Pinkenba QLD 4008...
- Page 5 Attach panels [6] to panel [7] secure with 4x locking nuts (D). Attach panels [6] to panel [7] with 4x long dowels (F) and secure Tighten with a screwdriver. with 4x bolts (E). Tighten with an Allen key (J). mocka.co.nz I mocka.com.au I PO BOX 18, Pinkenba QLD 4008...
- Page 6 Slide panel [5] down along the grooves between the panels [3] and [4] as shown. 4x dowels (A) and secure with 8x long bolts (B) as shown. Tighten with an Allen Key (J). Apply 8x felt pads (K) to the panel [2] as shown. mocka.co.nz I mocka.com.au I PO BOX 18, Pinkenba QLD 4008...
- Page 7 (V) to the top of the back side of the unit as shown panels [6] with 4x dowels (A) and secure with 4x locking nuts (D). using 1x washers (Z) and 1x screws (W). Tighten with a screwdriver. Tighten with a screwdriver. mocka.co.nz I mocka.com.au I PO BOX 18, Pinkenba QLD 4008...
- Page 8 (V). Fasten to the wall using 1x washer (Z) , 1x wall anchor (X) and 1x wall screw (Y). Ensure unit is balanced and steady before use. mocka.co.nz I mocka.com.au I PO BOX 18, Pinkenba QLD 4008...
Need help?
Do you have a question about the Sadie and is the answer not in the manual?
Questions and answers