Adjustments; Bleeding Air From Fuel System; Parking Brake - CanyCom S100 Operator's Manual

7

7.8 Adjustments

7.8.1 Bleeding Air from Fuel System

To avoid engine starting malfunction, bleed air from fuel system after fuel filter or
fuel pipe replacements, or after any operation when fuel tank was completely emp-
tied.

7.8.2 Parking Brake

●
Proper brake performance is critical for safety. Always keep brake adjusted for
maximum performance.
● Use the brake with the steering lever in the neutral position.
Safety cover
Turnbuckle
Spring
Maintenance
ON
Lock nut
1. Fill the fuel tank with fuel.
2. Turn the starting switch to the [
start the fuel pump for about 5 seconds (automatic
air bleeding system).
1. Remove the safety cover.
2. Surely lock the parking brake pedal.
3. Loosen the lock nut, and adjust the spring hook inner
dimension to 67 to 68 mm by turning the turnbuckle.
4. After adjustment, tighten the lock nut firmly.
- 44 -
(ON)] position to