CanyCom S100 Operator's Manual page 35

Item
• If the engine is operating abnor-
Engine
mally, or if the exhaust condition at
compres-
idle or at high RPM is abnormal,
sion
check the engine compression.
• Check engine base for cracks or
deformities.
Engine
• Check for loose or missing
mount
mounting bolts or nuts.
• Check oil level and dirt in oil.
• Check for oil leakage from head
Lubrication
system cover, oil pan, pipes, etc.
• Check for dirty or clogged filter.
• Check for fuel leakage from fuel
tank, injection pump, hoses,
pipes.
• Check for damage or deterio-
rated fuel hoses.
• Check for dirty or clogged fuel
filter cartridge.
Fuel system
• Check for any abnormality in
injection pressure or spray con-
dition of injection nozzle.
* If there is no abnormality in the
exhaust or rotation condition
when idling or accelerating, this
inspection can be omitted.
• Check for cooling water level,
dirty water.
• Check for any water leakage
from radiator, engine, water
pump, hoses . Check for
clogged radiator fins.
• Check for damage or deterio-
rated fuel hoses.
• Check that radiator cap valve
functions properly.
Cooling sys-
• Check for damaged valve seat
tem
surface of radiator cap.
• Check the fan belt for tension.
• Check the belt for wear and
damage.
• Check for cracks, damage,
or deformation of cooling fan,
cover, duct.
• Check for loose mounting bolts
or nuts of cooling fan, cover.
Maintenance
Content of inspection
If you hear valve noise or
the engine is not running
smoothly, check valve
clearance.
No cracks or deformi-
ties.
There must be no loose
or missing mounting
bolts or nuts.
Oil level must be correct.
There must be no marked dirt.
There must be no
marked oil leakage.
There must be no dirt
or clogging.
There must be no fuel
leakage.
There must be no dam-
age or deterioration.
There must be no dirt
or clogging.
Must be specified injec-
tion pressure, and
spray must be normal.
Water level must be
correct, there must be
no marked dirt.
There must be no water
leakage or clogging.
There must be no dam-
age or deterioration.
Must function properly.
There must be no dam-
age.
Must be within a stan-
dard value.
Must not be worn remark-
ably nor damaged.
There must be no
cracks, damage, or
deformation.
There must be no loose
outing bolts or nuts.
- 29 -
Inspection
interval
Remarks
Please contact your
○ Canycom distributor
for inspection.
○ ○ ○
○ ○ ○
○ ○ ○ Inspection / replacement:
See page: 34
○ ○ ○
○ Replacement:
See page: 43
○ ○ ○
○ ○ ○
○ ○ Cleaning: See
page: 43
Please contact your
Canycom distributor
for inspection.
○
○ ○ ○ Inspection: See
page: 38
○ ○ ○
○ ○ ○
○
○
○ Inspection / Adjustment:
See page: 46
○
○
○
7