Yamaha P-120 P-120S Owner's Manual page 9

F5 G5 A5 B5 C6 D6 E6 F6 G6 A6 B6 C7
0
SONG [TRACK 1] and [TRACK 2] Buttons
The P-120/P-120S has a 2-track recorder, and
these buttons are used to select the track(s) to be
recorded or played back. See page 27 for details.
!
SONG [START/STOP] and [REC] Buttons
These buttons control the P-120/P-120S's user
song recorder, letting you record and play back just
about anything you play on the keyboard.
@
VOICE Buttons & [VARIATION] Button
Simply press any of the voice selectors to select
the corresponding voice. The voice selector LED
will light to indicate which voice is currently
selected. Press the [VARIATION] button so that its
indicator lights to select a variation of the currently
selected voice.
There is also a dual mode in which two voices
can be played simultaneously across the full range of
the keyboard (see page 18 for details), and a split
mode which allows different voices to be played by
the left and right hands (see page 19 for details).
The P-120/P-120S is supplied with a music stand that can be
attached to the instrument by inserting it into the holes at the
rear of the control panel.
#
[SPLIT] Button
Engages the split mode, in which different voices
can be played on the left- and right-hand sections of
the keyboard. See page 19 for details.
$
[REVERB] Button
The [REVERB] button selects a number of digi-
tal reverb effects that you can use for extra depth and
expressive power. See page 20 for details.
%
[EFFECT] Button
This button selects a number of effects which can
give your sound greater depth and animation.
^
[TOUCH] Button
The [TOUCH] button makes it easy to adjust the
touch response of the P-120/P-120S to match your
playing style. See page 23 for details.
&
[TRANSPOSE] Button
The [TRANSPOSE] button allows access to the
P-120/P-120S's TRANSPOSE function (to shift the
pitch of the entire keyboard up or down in semitone
intervals).
The Control Panel
Music Stand
9
P-120/P-120S