Yamaha P-120 P-120S Owner's Manual page 51

4. PROGRAM CHANGE
Data format: [CnH] -> [ppH]
CnH = Program event (n = channel number)
ppH = Program change number
P.C.#=Program Change number
Voice Name MSB
GRAND PIANO 1
VARIATION
GRAND PIANO 2
VARIATION
E.PIANO 1
VARIATION
E.PIANO 2
VARIATION
HARPSICHORD
VARIATION
E.CLAVICHORD
VARIATION
VIBRAPHONE
VARIATION
CHURCH ORGAN
VARIATION
JAZZ ORGAN
VARIATION
STRINGS
VARIATION
CHOIR
VARIATION
GUITAR
VARIATION
WOOD BASS
VARIATION
E.BASS
VARIATION
• When program change reception is turned OFF in the Function
mode, no program change data is transmitted or received.
Also, Bank MSB/LSB is not transmitted or received.
5. SYSTEM REALTIME MESSAGES
[rrH]
F8H: Timing clock
FAH: Start
FCH: Stop
FEH: Active sensing
Data Transmission
Transmitted every Received as 96-clock tempo timing
F8H
96 clocks when MIDI clock is set to External
Recorder start
FAH Recorder start Not received when the MIDI clock
is set to Internal.
Recorder stop
FCH Recorder stop Not received when the MIDI clock
is set to Internal.
If a signal is not received via MIDI for more
than 400 milliseconds, the same process-
Transmitted every
FEH ing will take place for All Sound Off, All
200 milliseconds
Notes Off and Reset All Controllers as
when those signals are received.
• Caution: If an error occurs during MIDI reception, the Damper, Sos-
tenuto, and Soft effects for all channels are turned off and an All
Note Off occurs.
MIDI Data Format/MIDI-Datenformat/ Format des données MIDI/Formato de datos MIDI
LSB P.C.#
0 112 0
0 113 0
0 112 1
0 113 1
0 112 5
0 112 88
0 112 4
0 113 4
0 112 6
0 113 6
0 112 7
0 113 7
0 112 11
0 113 11
0 112 19
0 113 19
0 112 16
0 113 16
0 112 48
0 113 48
0 112 52
0 113 52
0 112 24
0 113 24
0 112 32
0 113 32
0 112 33
0 113 33
Reception
6. SYSTEM EXCLUSIVE MESSAGES
(Yamaha MIDI Format)
Panel Data Transmit
Data format: [F0H] -> [43H] -> [0nH] -> [7CH] -> ... ->
[F7H]
F0H, 43H, 0nH, 7CH
00H, 2DH
43H, 4CH, 20H, 20H
43H, 4CH, 50H, 27H, 30H, 31H (CLP01)
30H, 30H
[PANEL DATA]
[CHECK SUM (1byte)] = 0-(43H+4CH+20H+......+Data end)
F7H
• Panel Data Contents
(1) 1'st Voice
(2) Dual On/Off
(3) Dual Voice
(4) Dual Balance
(5) Dual Detune
(6) Dual Voice1 Octave
(7) Dual Voice2 Octave
(8) Dual Voice1 Effect Depth
(9) Dual Voice2 Effect Depth
(10) Split On/Off
(11) Split Voice
(12) Split Point
(13) Split Balance
(14) Split Voice1 Octave
(15) Split Voice2 Octave
(16) Split Voice1 Effect Depth
(17) Split Voice2 Effect Depth
• Panel data send requests cannot be received.
7. SYSTEM EXCLUSIVE MESSAGES
(Universal System Exclusive)
(1) Universal Realtime Message
Data format: [F0H] -> [7FH] -> [XnH] -> [04H] -> [01H] ->
[llH] -> [mmH] -> [F7H]
MIDI Master Volume
• Simultaneously changes the volume of all channels.
• When a MIDI master volume message is received, the volume only
has affect on the MIDI receive channel, not the panel master vol-
ume.
F0H = Exclusive status
7FH = Universal Realtime
7FH = ID of target device
04H = Sub-ID #1=Device Control Message
01H = Sub-ID #2=Master Volume
= Volume LSB
llH
mmH = Volume MSB
F7H = End of Exclusive
or
F0H = Exclusive status
7FH = Universal Realtime
XnH = When n is received n=0~F, whichever is received.
X = don't care
04H = Sub-ID #1=Device Control Message
01H = Sub-ID #2=Master Volume
llH = Volume LSB
mmH = Volume MSB
F7H = End of Exclusive
(n: channel number)
(data length)
(CL)
(version x, y)
(18) Split Dumper Mode
(19) AUX Pedal Mode
(20) Reverb Type 1
(21) Reverb Type 2
(22) Reverb Depth 1
(23) Reverb Depth 2
(24) Effect Type 1
(25) Effect Type 2
(26) Effect Depth
(27) Variation On/Off
(28) Touch Sensitivity
(29) Fixed Data
(30) AUX Pedal
(31) Soft Pedal Depth
(32) Absolute tempo low byte
(33) Absolute tempo high byte
51
P-120/P-120S