Midi; Midi 1 Display - Yamaha Clavinova CVP-600 Owner's Manual

MIDI

Functions related to MIDI (Musical Instrument Digital Interface)
can be called up from pages 9 through 11.
• If you are using the MIDI terminals, set the HOST SELECT switch to "MIDI".
MIDI 1 Display —
Set the Send Channel SEND CH
In any MIDI control setup, the MIDI channels of the transmitting and
receiving equipment must be matched for proper data transfer (channels
1 through 16). This function sets the MIDI transmit channels of the
Clavinova .
Independent MIDI channels can be set for the following three differ-
ent types of play data.
LEFT Left voice in the Split mode
RIGHT1 Right voice in the Split mode/1st voice in the Dual mode/voice
for normal keyboard performance
RIGHT2 2nd voice in the Dual mode
MIDI Reception
The Clavinova always receives MIDI data in the "Multi Timbre" mode. This is a mode in which the
Clavinova voices can be independently controlled on different MIDI channel numbers (1 through 16) by
an external MIDI device. This means that you can produce the sound of a full band or ensemble on the
Clavinova by using a computer or MIDI sequencer.
9
PAGE
..........................................................
Transmission Channel
• LEFT setting: OFF (no transmission),
channels 1 — 16
• Basic setting: 3
• Backup of last settings: OFF
• RIGHT 1 setting: OFF (no transmis-
sion), channels 1 — 16
• Basic setting: 1
• Backup of last settings: OFF
• RIGHT 2 setting: OFF (no transmis-
sion), channels 1 — 16
• Basic setting: 2
• Backup of last settings: OFF
CVP-98/96/600
143