Making Settings In The Initial Edit Display - Yamaha Clavinova CVP-600 Owner's Manual

The following parameters can be changed in the Initial Edit display.
Refer to the indicated page for details on each parameter.
Parameters which can be changed with Initial Edit:
When one of tracks 1 - 16 is selected
• Volume (page 94)
• Voice (page 27)
• Pan (page 132)
• Reverb Depth (page 43)
• Effect Depth (page 46)

Making Settings in the INITIAL EDIT Display

Z
Select the track to be edited.
Select the track whose parameters you wish to change by pressing the
TRACK < or > button. If TTL (Total) is selected, the setting change
will be made not for each track but for the entire song.
X
Select the parameters to be changed.
Select the parameters to be changed by pressing the SELECT
button.
The selected pa-
rameters to be
changed.
The selected track
is highlighted.
When [TTL] (Total) is selected
• Tempo (page 49)
• Reverb Type (page 41)
• Reverb Depth (page 42)
• Effect Type (page 46)
...............................................................
.......................................
The current parameter
value of the selected track.
Song Recording
• The parameters Program Change
Number ( PRG# ), Bank LSB ( BNK
LSB ), and Bank MSB ( BNK MSB ),
which are used to select voices via
MIDI, are also displayed when VOICE
is selected.
or
125
CVP-98/96/600