Yamaha Clavinova CVP-600 Owner's Manual page 157

AUX OUT [L/L+R] [R] Jacks
+
L/L R R
AUX OUT
Stereo System
[EXP.PEDAL] Terminal
EXP. PEDAL
MIDI [IN] [OUT] [THRU] Terminals
THRU OUT
MIDI
Tone Generator MIDI Sequencer
HOST SELECT switch and [TO HOST] terminals
Mac MIDI
PC-1 PC-2
TO HOST HOST SELECT
Personal Computer
.....................................................................
By connecting audio cables to the jacks
as shown below, output the sound of the
Clavinova to a stereo system, amplifier, mix-
ing console, or recording equipment. Set the
[MASTER VOLUME] of the Clavinova to
around the middle position and adjust the
volume level from the connected equipment.
..................................................................................
An optional Yamaha FC7 Foot Controller
can be connected to this terminal for control-
ling the volume of your keyboard perform-
ance with your foot.
....................................................
Connect the Clavinova to external MIDI
devices by using MIDI connecting cables.
Set the HOST SELECT switch below to
IN
"MIDI" when using the MIDI terminals.
[TO HOST] terminal is connected di-
rectly to the personal computer.
Set the HOST SELECT switch to match
the corresponding computer or connected
MIDI device.
See the section "Connecting to a Personal
Computer" for details.
The Connectors
............
155
CVP-98/96/600