Style Clear; Effect Type List - Yamaha Clavinova CVP-600 Owner's Manual

Style Clear

................................................................................................................
Press the STYLE CLEAR LCD button in CUSTOM STYLE display
page 3 to entirely clear the current custom style. The "Are you
sure?" confirmation prompt will appear. Press YES to clear the style or
NO to abort.
Volume & Effects
...............................................................................................
CUSTOM STYLE display page 4 includes a range of parameters that
let you individually set the volume, reverb, effect, and pan for each part
of each custom style section. Use the SECTION parameter to select the
section (or "ALL" sections), and the PART parameter to select the part
(or "ALL" parts). The third LCD button selects VOLUME, REVERB,
EFFECT or PAN, and the VALUE (or DEPTH) parameter sets the
amount or depth. When VOLUME is selected the SECTION parameter
is fixed at "ALL" and the VALUE range is from –50 to +50, relative to
the preset volume of the source style. The REVERB and EFFECT
DEPTH ranges are from 0 to 100. The PAN VALUE settings are L10 (full
left) ... C (center) ... R10 (full right). When EFFECT is selected the
TYPE parameter appears and you can also select the effect type via the
TYPE LCD button. The available effect types are listed below.

Effect Type List

• CHORUS 1
• CHORUS 2
• CHORUS 3
• CELESTE 1 • FLANGER 1
• CELESTE 2 • FLANGER 2
• CELESTE 3 • OFF
Custom Style
• Normally the preset VALUE and EF-
FECT TYPE are initially selected. If
PART is set to "ALL", the R1 part
preset values are displayed. If SEC-
TION is set to "ALL", the MAIN A pre-
set values are displayed.
• Effect type "OTHERS" may appear if
the preset effect type is other than that
of what is in the list. The "OTHERS"
selection cannot be re-selected once
you change to a different type.
CVP-98/96/600
75