The Connectors - Yamaha Clavinova CVP-600 Owner's Manual

CHAPTER

The Connectors

[MIC.VOL.] Dial and [MIC.] Jack
MIC. VOL. MIC. PHONES
MIN MAX
[PHONES] Jacks
MIC. VOL. MIC.
MIN MAX
AUX IN [L/L+R] Jacks
+
L/L R R
AUX IN
Tone Generator
154
CVP-98/96/600
8: Others
By connecting a microphone to the [MIC.]
jack (standard 1/4" phone), you can enjoy sing-
ing along with your own performace or with
song playback. The sound input from the mi-
crophone is output through the Clavinova's
speakers. The microphone volume can be ad-
justed with the [MIC.VOL.] dial.
..................................................................................................
To use headphones, connect them to one of
PHONES
the [PHONES] jacks (standard 1/4" phone
jacks). The internal speaker system of the
Clavinova is automatically shut off when a pair
of headphones are connected. Two people can
enjoy the sound together by connecting two
pairs of headphones to the two available termi-
nals.
.....................................................................................
The sounds of other instruments or tone
generator modules can be output through the
speaker system of the Clavinova by connecting
audio cables to the jacks as shown below.
.........................................................
Recommended Headphones:
• Yamaha HPE-160 headphones
• Do not return the sound output
through AUX OUT [L/L+R] [R] jacks
to the AUX IN [L/L+R] [R] jacks.
Also, when connecting the AUX
OUT [L/L+R] [R] jacks to external
audio equipment, do not connect
these devices back into the
Clavinova's AUX IN [L/L+R] [R]
jacks.
Since the input sound from the
Clavinova's AUX IN [L/L+R] [R] is
output through the Clavinova's AUX
OUT [L/L+R] [R] as is, connecting as
described above may result in feed-
back, making normal playback im-
possible and even resulting in dam-
age to the instrument.
• Internal [MASTER VOLUME] and
[REVERB] settings cannot be applied
to the input sound received at the AUX
IN [L/L+R] [R] jacks.
• Use the AUX IN [L/L+R] and AUX OUT
[L/L+R] jacks for mono input and mono
output, respectively.