Yamaha Clavinova CVP-600 Owner's Manual page 117

B
Select the Punch-in mode.
Select the desired Punch-in mode by using the LCD button located
second from the right. Two modes are available, as described below.
1ST KEY Recording begins as soon as the first key is played, after
Punch-in playback is started in step 7 (below).
PEDAL Recording begins as soon as the left pedal is pressed, after
Punch-in playback is started in step 7 (below).
N
Select the Punch-out mode.
Select the desired Punch-out mode by using the center LCD button.
Two modes are available, as described below.
REPLACE When recording is stopped, all data following the stopped
point will be erased.
PNCH.OUT When recording is stopped, all data following the stopped
point will remain intact.
M
Start playback and recording.
Press the [PLAY/STOP] or [PAUSE] button to start playback from
the current paused location.
To start Punch-in record when the 1ST KEY mode is selected, simply
begin playing at the point from which you want to record.
To start Punch-in record when the PEDAL mode is selected, press the
left pedal at the point from which you want to record.
.....................................................................
.................................................................
............................................................
Song Recording
• When the PEDAL Punch-in mode is
selected, the left pedal is automatically
assigned for this function only (the
normal pedal function is canceled).
• When the PEDAL Punch-in mode is
selected, recording can be started
directly by pressing the left pedal,
without having to start playback by
pressing the [PLAY/STOP] or [PAUSE]
button.
CVP-98/96/600
115