Yamaha Clavinova CVP-600 Owner's Manual page 71

X
Select a source style.
Select a preset style that is close to the style you want to create. Preset
style selection is carried out in the normal way (page 47).
If you want to select a [DISK/CUSTOM] style, press the [DISK/
CUSTOM] style button once again and use the STYLE
tons, or the data dial or [–/+] buttons to select a [DISK/CUSTOM] style.
C
Select the section you want to record.
In the CUSTOM STYLE display page 1, press the first LCD button
as many times as necessary to select the section you want to program
first: MAIN A, MAIN B, INTRO, FILL IN, or ENDING. The MAIN A
section is initially selected.
Beat of the selected style
Current measure number of
the selected section
Total measure number of
the selected section
V
Change the time signature and number of meas-
ures, if required.
If you want to create a style in a different time signature than the cur-
rent style, or change the number of measures in the selected section,
Press the PAGE [>] button to go to CUSTOM STYLE display page 2.
Current recording
section and part
...................................................................................
.................................................................................................
and but-
.....................................
• In the CUSTOM STYLE, MAIN A,
MAIN B, INTRO, FILL IN or ENDING
are referred to as "section", and
RHYTHM 1/2, BASS, CHORD 1/2,
PAD or PHRASE 1/2 are referred to as
"part".
• Only one pattern can be created for
each INTRO, FILL IN and ENDING
section.
• Whether the "A" or "B" variations of the
INTRO, FILL IN and ENDING sections
are used as the source pattern de-
pends on whether the MAIN A or MAIN
B section was selected when the Cus-
tom Style function was engaged. (As
for FILL IN, "FILL IN from A to A", or
"FILL IN from B to B" is used.)
Custom Style
69
CVP-98/96/600