Section 2: Installation
November 2019
5.
6.
7.
8.
9.
24
Calculate the Wire Distance as described in
Feed the wire through the weight and Reference Reflector (RR).
M6 x 2
Torque=2.5 Nm
Cut the wire 0 - 150 mm
under the weight
Position the weight to the correct Wire Distance.
Tighten the two screws. Torque=2.5 Nm.
Cut the wire 0 to 150 mm below the end of the weight.
"Wire Distance calculation" on page
Bronze rod
1
2
1. Reference Reflector (RR)
2. Weight
Manual Supplement
00809-0200-5900, Rev AC
27.
Installation