Converting The Burner For Use With Propane Gas - Beckett CG15 Manual

Converting the Burner for use with Propane Gas

The Beckett Propane Restrictor Conversion Kit allows for
the conversion of CG15, CG25, and CG50 burners for
use with propane gas. With the proper installation of the
restrictor and attached O-ring, adjustments and settings
for propane use will be the same as the adjustments
and settings for natural gas use as detailed in the
burner manual.
Explosion, Fire, and Carbon Monoxide Hazard.
This conversion kit shall be installed by a qualified
service agency in accordance with the manufacturer's
instructions and all applicable codes and requirements
of the authority having jurisdiction. (In Canada,
in accordance with the requirements of the CAN/
CGA-B149 Installation Code.) If the information in these
instructions is not followed exactly, a fire, explosion,
or production of carbon monoxide may result causing
property damage, personal injury or loss of life. The
qualified service agency is responsible for the proper
installation of this kit. The installation is not proper
and complete until the operation of the converted
appliance is checked, as specified in the manufacturer's
instructions supplied with the kit.
Figure 12 — Propane Conversion Major Components
H
G
F
18 — Section: Installation Instructions
B
C
A
D
E
Figure 13 — Component Locations
B
C
Major Component Key
A Air Tube
B Jacking Screw
C Internal Gas Tube
D Burner Housing
CG15, CG25, CG50 Burner Manual, Form No. 6104BCG50
E
H
G
F
E External Gas Manifold
F Propane Restrictor
G Restrictor O-ring
H Gas Tube O-ring