CHAPTER 5 OPERATION CHECK USING SYSTEM SIMULATOR SM+
(1) Start PM+.
(2) Select "initial.prw" by clicking [Open Workspace] from the [File] menu and click [Open]. A workspace into which
the source file will be automatically read will be created.
(3) Select [Project Settings] from the [Project] menu. When the [Project Settings] window opens, select the name
of the device to be used (the device with the largest ROM or RAM size will be selected by default), and click
[OK].
30
Click
This will be displayed
when the device name
is changed.
Application Note U18752EJ2V0AN
Click
Click