Primera CX1200E Operation Manual page 8

2. In order to remove the base unit, you will need to detach the boards on the right and left side of
the base using a Phillips screwdriver to remove the screws. Lift the base out of the crate using
the nylon lifting handles on either side. Place the base on the Primera CX1200e cart or a similar
cart or bench with adequate surface area and load specifications. Two people are required to lift
the base on to a cart or counter.
Figure 2-2.
Now remove two screws and washers from each side to remove the nylon handles. Finally,
replace the screws only.
Figure 2-3.
Unpack and Assemble 3