Section 1. Introduction - Primera CX1200E Operation Manual

Section 1: Introduction
Thank you for purchasing the CX1200e Color Label Press. The CX1200e is a fast low cost solution
for your label printing needs. Here after in the manual the CX1200e Color Label Press will be
referred to as the "CX1200e". The laser printer portion will be referred to as the "printer". The
unwinder and rewinder unit will be referred to as the "base". Toner and label stock will be referred
to as "media".
This manual is one of many sources of information for this product. If you have problems or
questions please consult one of these resources
Tech Support Phone: +49 611 92 777 0
•
Tech Support Email: support@primera.eu
•
Figure 1-1.
Unwinder
Cutter
Note: The monitor, computer, surge protector and table are NOT included with the CX1200e
Important Note on Label Press Operating Environment! It is strongly recommended that the
CX1200e Color Label Press is operated in an air-conditioned, humidity controlled, smoke free, pet free
environment.
• Online Knowledgebase: www.primera.com/kb
Unwinder
Cut/Stop Button
Dancer
Arm
Label Guide Feeder Door
Printer
Control Panel Base Unit
Label Guide
Rewinder
Discs
Dancer
Arm
Rewinder
Tensioning Unit
Tension Knob
Introduction 1