4. Insert a new image transfer unit back into the printer.
a. Align the guides with the insertion grooves and gently slide the unit in.
Figure 9-9.
b. Rotate the handle up, and push gently to lock the unit in place.
Figure 9-10.
c. Lower the lever to lock the image transfer unit into place.
5. Close the printer door.
6. Turn the printer on. The printer returns to a Ready state.
9.9 Technical Support.
If you have difficulties operating your CX1200e, the following additional resources are available.
Primera Knowledge Base www.primera.com/kb
•
Email Support support@primera.eu
•
Phone Support +49 611 92 777 0 (Mon - Thu 9 a.m. - 5 p.m, Fri 9 a.m. - 3 p.m. CET)
•
54 Maintenance and Troubleshooting