Section 2: Unpack and Assemble
1. Remove the packaging material as shown below. The printer portion of the CX1200e will be
packaged inside a separate box. Set aside the printer box for now. The base unit will be inside
a wooden crate. You will need to remove the outer wooden crate using a 1/2" socket wrench or
power driver with socket adapters. Remove 5 bolts each from the front and back and 2 bolts
from each side. You may now lift off the top and sides as one piece.
Figure 2-1.
Phillips
1/2"
Note: Save all packing materials!
2 Unpack and Assemble