Primera CX1200E Operation Manual page 36

8. In this case, 252 was the correct number to choose. Now the contour line follows the outer
border of the image correctly.
9. To add a bleed to the
image adjust the border
value on the counter cut
tool bar. Click Apply
again. Note: Any time you
adjust a value on the tool-
bar you will need to click
Apply to make the change.
The threshold window will
appear again with your
last entered value remem-
bered. Click OK to carry
out the change.
Note: Bleed amount is
NOT the correct value to
adjust.
Create a Print File 31