Section 3. Install Software - Primera CX1200E Operation Manual

Section 3: Install Software
Three pieces of software will need to be installed in order to print to the CX1200e:
The CX1200e Printer Driver. This software allows a networked or local computer to
•
communicate with the CX1200e via the included Ethernet cable or Ethernet crossover cable.
PTPrint. This software allows you to import an existing file and arrange it across a page (step
•
and repeat). This software is a full featured lay out software that supports imbedding or linking
many different files types. It is not a design software. Only one copy of the print software can
be used with each CX1200e. This ensures proper supply level tracking.
Status Monitor. This installs automatically along with PTPrint. This allows you to estimate ink
•
costs for a particular label and accurately track toner and label stock supplies.
1. To install the software place the CD in your CD-Rom Drive. The Installer application should
automatically launch in a few moments. If it does not automatically launch, follow these steps:
Double-click the My Computer Icon, then double-click the icon of the appropriate CD drive
•
containing the Software Installer disc.
Double-click setup.exe
•
2. Follow the prompts in the software installer to complete the installation of the software.
Note: If you connect your PC to the CX1200e using a yellow crossover cable it may be necessary to
disable or modify the settings of your antivirus/firewall program.
Install Software 11