Setting Song-Related Parameters - Song Settings - Yamaha PORTATONE PSR-1000 Owner's Manual

Setting Song-related Parameters — Song Settings
The explanations here apply to step #3 of the procedure on page 133.
Determines the MIDI channel assigned
to the [TRACK2] button.
Determines the MIDI channel assigned
to the [TRACK1] button.
Determines the harmony channel for
Vocoder (page 132).
Making Global and Other Important Settings — Function
Allows you to play back all songs
from the same folder continuously.
Turns Quick Start on/off (see note).
A
B
C
D
E
1 2 3 4 5
F
G
H
I
J
6 7 8
Determines whether the Phrase
Mark Repeat function for the song
is on or off. When this is on, you
can repeatedly play back a
specified phrase (selection of
measures) of the song. The
method for setting a phrase mark
is the same as that in the SONG
POSITION display (page 78).
Determines the language of the
displayed lyrics.
When this is set to "AUTO," the
language defaults to that of the
song data. When not set to
"AUTO," the language defaults to
Japanese, when the internal
setting (page 151) is
JAPANESE; for all other
languages, this is set to
"INTERNATIONAL."
When set to "ON," this
automatically sets the proper
Track 1 and Track 2 channels.
Normally, this should be set to
"ON."
Quick Start
On some commercially avail-
able song data, certain set-
tings related to the song
(such as voice selection, vol-
ume, etc.) are recorded to
the first measure, before the
actual note data. When
Quick Start is set to "ON,"
the PSR-2000/1000 reads
all initial non-note data of the
song at the highest possible
speed, then automatically
slows down to the appropri-
ate tempo at the first note.
This allows you to start play-
back as quickly as possible,
with a minimum pause for
reading of data.
n
Channel
Refers to the MIDI channel
(page 157). The channels
are assigned as follows:
Song
1 - 16
Accompaniment Style
9 - 16
n
Phrase Mark
This data specifies a certain
location in the song data.
PSR-2000/1000
137