Adjust the Volume Balance and Changing Voices — Mixing Console
Adjusting the Effects
The operations for this page apply to step 2 of the procedure on page 121.
Indicates the type name for each effect block.
Each press of
Determines the amount of effect that is applied to each part. For more information
about the characteristics of each effect, see the Effect Block list on page 125.
These determine the effect block and let you assign the effect.
BLOCK............Determines the effect block (group of similar or related effects).
PART ...............Determines the part to which the Insertion effect is applied. It is effective only
when BLOCK is set to "DSP1/DSP," PARAMETER is set to "CONNECTION," and
VALUE is set to "Insertion" — or when BLOCK is set to "DSP2–4" (PSR-2000).
CATEGORY.....The various effect programs (in Type below) are grouped into categories. This
parameter may not be available depending on the selected block.
TYPE ...............Determines the type of effect that is assigned to the selected effect block. The
actual effect types that are available may differ depending on the selected block.
Press this to edit and store
the effect (page 124, 125).
Switches among the
When the BLOCK
parameter is set to
REVERB, CHORUS, or
DSP1-4/DSP, press this
to call up the display
from which you can
change the detailed
settings for the effects.
There are three effect sec-
tions: Reverb, Chorus, and
DSP (which contains a vari-
ety of effect types). For
details, refer to the Effect
Block list (page 125).