Playing Back Songs on Disk
Insert the disk into the drive.
The method for playing back is the same as in the "Playing the Internal Songs" instructions
(page 76), except that you should select FLOPPY DISK page in the SONG display.
Other Playback-related Operations
I Repeat / Rewind / Fast forward
SONG POSITION display
When "BAR" is selected, you can specify a measure number (counted from the
beginning of the song) by using the [REW] and [FF] buttons.
When "PHRASE MARK" is selected, specify the phrase mark number by using the
[REW] and [FF] buttons.
"PHRASE MARK" is shown only when the song contains phrase marks. Press the
[J] button to toggle between "BAR" and "PHRASE MARK," then use the [REW]
and [FF] buttons to select the desired measure or phrase mark.
I Adjusting the Volume Balance / Muting Speciﬁc Channels
CHANNEL ON/OFF display
Select the [SONG] tab with the [CHANNEL ON/OFF] button, and mute the desired channel
by setting it to [OFF]. To solo a channel (only that channel will sound), hold down the
appropriate button corresponding to the channel. To release the solo for the channel, press
that channel's button again.
During playback, you can have the song return to the top and play back again
from the beginning by pressing this button. When playback is stopped,
pressing this button returns the song to the beginning.
Press this button to call up the SONG POSITION display (see
below). To return to the SONG display, press the [EXIT] button.
Press this button to call up the BALANCE display (page 61).
Press this button to call up the CHANNEL ON/OFF display (see below).
Insert the disk shutter side
ﬁrst and label face up.
Before proceeding, make
sure to read the section
"Handling the Floppy Disk
Drive (FDD) and Floppy
Disk" (page 7).
You can set whether or not
the PSR-2000/1000 auto-
matically calls up the ﬁrst
disk song when a disk is
inserted (page 150).
Some song data for the
PSR-2000/1000 has been
recorded with special "free
tempo" settings. During play-
back of such song data, the
measure numbers shown in
the display will not corre-
spond to the actual measure;
this only serves as a refer-
ence as to how much of the
song has been played back.
This data speciﬁes a certain
location in the song data.
Refers to the MIDI channel
in the song data. The chan-
nels are assigned as shown
below for the PSR-2000/
1 - 16
9 - 16