Safety Precautions - Vicon ALU-2500/230 Mounting And Operating Instructions

Safety Precautions

1. Read these instructions carefully before operating the components in order to
avoid malfunctions and damages caused by improper installation or use.
2. Installation may only be carried out by authorised personnel according to the local
safety regulations.
3. Only operate the device with the stated operating voltage.
4. Never use the device for other purposes than designated.
5. Repairs may only be carried out by authorised personnel.
6. Remove the device from power supply if you do not use it for an extended period
of time.
7. Immediately disconnect the device from power supply if any liquid or solid matter
should get into the housing and have it checked by your authorised dealer before
re-using.
8. Follow the notes attached to the device.
9. The power supply has to be externally protected.
10. In order to avoid heat accumulation in the housing:
- do not expose a housing without sunshield to direct sunlight
- keep sufficient distance to direct heat sources
-12-