Restoring A Backup Of The System - CYBELEC ModEva Pac User Manual

r
eSTorinG a backup of The SySTeM
The process to restore a backup of the system is very similar to creating the backup itself.
Proceed as follows:
If the storage media (CF card) has to be replaced, make sure it is with the same
model of the same manufacturer. If not possible, contact Cybelec to get an
approved replacement.
S
The backup file are automatically named
created in the YYMMDD format.
A
pril
40/40 2016
V2.3
i :
etting nStructionS
1. Turn the NC off.
2. Plug the backup USB key in the NC, turn it back on, and execute points 6 and 7 of
the previous procedure.
3. Once in the following menu, select option
* .....
*
***************************************************
****************************************************
*
* 1.
* 2.
* 3.
* 0.[X]
*
****************************************************
PICK A KEY (1,2,3,0 or X)
4. Enter the name of the backup you want to restore.
***************************************************
*
* ENTER THE NAME OF THE ARCHIVE FILE WITHOUT
* THE SUFFIX BK AND EXTENSION (.TBI), THEN
* PRESS ENTER OR JUST PRESS ENTER TO ABORT.
*
* NOTE: THE PC WILL AUTOMATICALLY REBOOT
*
*
***************************************************
AVAILABLE FILE(S) :
BK160425
ENTER A FILENAME (numbers only): BK_
5. The restore operation starts.
***************************************************
*
* DO NOT TURN OFF THE PC !!!
*
*
***************************************************
6. The NC automatically reboots at the end of the process.
3. RESTORE SYSTEM
LIST ARCHIVE FILE(S)
BACKUP SYSTEM DISK
RESTORE SYSTEM DISK
EXIT - REBOOT PC
AT COMPLETION OF THE RESTORE
followed by the date they were
BK
RESTORE IS RUNNING ...
ModEva Pac User Manual
DISK.
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*