Programming (Optional, Only For Off-Line Version) - CYBELEC ModEva Pac User Manual

3d p (
roGraMMinG
In this mode (available only on the ModEva software with 3D option), the operator can
conceive a part directly in 3 dimensions. The definitions of the different icons you will
encounter through these pages are described in the 3D Reference Manual, in chapter
Definition of the Icons.
Touching the display window inverts the two-dimensional and the axonometric
views, allowing the operator to create his part in two or three dimensions.
S
Selecting tools directly from this window places them automatically in the
middle of the machine. To change their position, see
12.
A
pril
20/40 2016
V2.3
,
opTional only for off
→ Product 3D
Working window
(here showing
two-dimensional view)
i :
etting nStructionS
1. Touch the
2. Touch the P d
roduct
enter the bending length, and select the tools to be used for the part by touching
their respective fields.
3. Touch Q to confirm the chosen values.
uit
4. Touch the
between the two functions is:
• M 1F: Shows the product in plan mode (2D).
odiFy
• M 2F: Shows the product in plan mode and in axonometric mode (3D).
odiFy
5. Touch this button to add a
rectangular face. The base rectangle
appears in plan mode in the work
window as well as in axonometric
mode. The tool window is adapted.
6. Introduce the dimensions for
our example: 150.00
- )
line verSion
button and select n
eW
field and select the material, enter its thickness and Sigma,
ata
button and select M
odiFy
a and B (in
and 200.00).
ModEva Pac User Manual
Product data field
Tool window
(here showing add
rectangular face)
Display window
(here showing
axonometric view)
P in the list.
roduct
Tooling Management, page
1F or M 2F. The difference
odiFy
Base rectangle
dimensions