Bend 2D Page - CYBELEC ModEva Pac User Manual

b 2d p
end aGe
S
The operator has the possibility to modify the bending order (see
Bend 2D Page, page
like minimum number of swings or returns. To do that, please refer to the 2D
Reference Manual, section Simulation criteria.
A
pril
22/40 2016
V2.3
→ Bend 2D
i :
etting nStructionS
1. At this point, a product must have been programmed, using one of the modes
previously explained.
2. In the S . field, choose the option
iMuLat
3. Touch the
4. The message S
iMuLating
the top right-hand corner of the screen.
5. The succession of sequences can then be visualized using the
23) or to ask the software to respect specific criteria
6. In case the software program does not find any solution, the bending order must be
imposed manually (see
W
itHout
button and select S
earcH
r ..., then c
unS aLcuLating
Touch Bend 2D Page, page
ModEva Pac User Manual
P . B .
rogr endS
B r in the list.
ending ange
... appears in the interactive field on
and
Touch
23).
keys.