CYBELEC ModEva Pac User Manual page 34

See also the Corrections section in the 2D Reference Manual.
Depending on the material, the machine adjustment and the exactness of the
data introduced, 2 or 3 corrections can be necessary for a bend. This can be
considered as being a normal situation.
10. Proceed in the same manner for all the bends by navigating through the bends by
11. When all the bends of the product turn out as expected, go into automatic mode
A
pril
28/40 2016
V2.3
8. Touch the a field,
ngLe
The software automatically calculates the necessary correction (-0.436, which can
be seen in the y1, y2
9. Carry out a second test bend (on the same sequence, with a second test product). If
necessary, make a new correction.
means of the and
and choose the work page you like:
• Bend Numerical (see page
• Bend 2D Page (see page
• Bend 3D (see page 9)
B column, and enter the measured angle
end
fields, in the B column).
end
keys.
9),
22),
for 3D software.
ModEva Pac User Manual
(93.0 in this case).