Bend Numerical Page (Direct Programming) - CYBELEC ModEva Pac User Manual

ModEva Pac User Manual
b n p
end uMerical aGe
This type of programming is often used for simple products or by operators having
worked on conventional press brakes without numerical controls.
This page is very user-friendly, for the operator has on one single screen all the
information and fields necessary for the programming of his product.
The bending order is chosen by the operator, since he programs directly each bend.
In this example, we will program the part described in
page
S
The programming of the real position of the back gauge requires of the operator
to subtract (approximately) the steel thickness from the external dimension of
the product.
(d p
irecT roGraMMinG
→ Bend Numerical
16).
i :
etting nStructionS
1. Touch the
2. On the top of the screen, select the material, enter its thickness and Sigma, and
select the tools to be used for the part by touching their respective fields.
3. Program the required
the tools and the material already programmed. It is also possible to directly enter
the Y1 / Y2 values without programming the angle.
4. Program the real position of the back gauge
modified if different from X1.
5. If necessary, program the specific data for the current sequence (see
and other functions, page
6. The two bends of section 1 (see
enter 2 in the cy field (CY stands for cycle, meaning this sequence is repeated twice
in the program).
7. To create the subsequent sequence, press the
B in the list. It can be seen that all the data has been copied into the second
end
sequence.
)
button and select n P
eW
a (here 90.0°). The Y depth will be calculated according to
ngLe
X1
26)
Creating a Part Program, page
Creating a Part Program (see
in the list.
roduct
(here 43.00). X2 can be individually
Position of axes
16) being identical,
button and select c
oPy
A
pril
2016 25/40
V2.3