Cybelec Software; Installing The Software; Leaving The Software - CYBELEC ModEva Pac User Manual

ModEva Pac User Manual
c S
ybelec oftware
i S
nSTallinG The ofTware
The software delivered with the ModEva can be installed on the numerical control itself of
course, but also on a PC. When running the software's installation program, the choice is
given in a window as shown below.
l S
eavinG The ofTware
It is possible at any time to quit the task after having memorized the current state.
However it is important to leave the software in the correct way by using the
function.
This procedure will close the PC-ModEva software and bring you to the Windows
environment.
The same procedure can be used on the PC software, or press the F6 key twice
on any page.
The Windows Operating System, like on every computer, is very
sensitive to inappropriate shutdown. Make sure that you properly turn
the system off, and NEVER by cutting the power off! This can destroy
the CF card!
Select here the type of
installation desired
→ Quit → Confirm
Q
uit
A
pril
2016 37/40
V2.3