Tooling Management; Creating A Tool - CYBELEC ModEva Pac User Manual

t M
oolinG anaGeMent
Tooling management involves the creation, configuration and positioning of the tools that
will be used on the machine. These tools are then taken into account in bend calculations.
c T
reaTinG a ool
When it comes to creating new tools, the easiest way to proceed is often to modify an
existing one. The process is the same whether you want to create a new punch or a new
die.
S
For more information about the tools' creating process, please refer to the Tools
chapter of the 2D Reference Manual.
A
pril
12/40 2016
V2.3
→ Programming of punches/dies
Punch name
i :
etting nStructionS
1. If you know the name of the tool you want to modify, touch the
top left corner and enter directly the desired tool's name.
2. If you don't know which tool looks the
most like the one you want to create,
you can touch and hold the
field until the message
the top right corner. The list of tools
appears and it is then possible to
browse visually through the existing
ones.
3. Modify the necessary fields, enter a new name and save the new tool by touching
the button and selecting
P
uncH
oK appears in
M in the list.
eMoriZe
ModEva Pac User Manual
Touch here to display
the tool's default shape
(brown color), allowing
an easier identification of
the various dimensions
P field on the
uncH